CCPP SciDoc v7.0.0  v7.0.0
Common Community Physics Package Developed at DTC
Loading...
Searching...
No Matches
cu_gf_sh.F90
1!>\file cu_gf_sh.F90
2!! This file contains Grell-Freitas shallow convection scheme.
3
4!> This module contains the Grell-Freitas shallow convection scheme
5module cu_gf_sh
6 use machine , only : kind_phys
7 !real(kind=kind_phys), parameter:: c1_shal=0.0015! .0005
8 real(kind=kind_phys), parameter:: c1_shal=0. !0.005! .0005
9 real(kind=kind_phys), parameter:: g =9.81
10 real(kind=kind_phys), parameter:: cp =1004.
11 real(kind=kind_phys), parameter:: xlv=2.5e6
12 real(kind=kind_phys), parameter:: r_v=461.
13 real(kind=kind_phys), parameter:: c0_shal=.001
14 real(kind=kind_phys), parameter:: fluxtune=1.5
15
16contains
17
18!>\defgroup cu_gf_sh_group Grell-Freitas Shallow Convection Module
19!! This module contains Grell-Freitas shallow convection scheme.
20!> \ingroup cu_gf_group
21!> @{
22!> GF shallow convection as described in Grell and
23!! Freitas (2014) \cite grell_and_freitas_2014. input variables are:
24!!\param us x wind updated by physics
25!!\param vs y wind updated by physics
26!!\param zo height at model levels
27!!\param t,tn temperature without and with forcing at model levels
28!!\param q,qo mixing ratio without and with forcing at model levels
29!!\param po pressure at model levels (mb)
30!!\param psur surface pressure (mb)
31!!\param z1 surface height
32!!\param dhdt forcing for boundary layer equilibrium
33!!\param hfx,qfx in w/m2 (positive, if upward from sfc)
34!!\param kpbl level of boundaty layer height
35!!\param rho moist air density
36!!\param xland land mask (1. for land)
37!!\param ichoice which closure to choose
38!!\n 1: old g
39!!\n 2: zws
40!!\n 3: dhdt
41!!\n 0: average
42!!\param tcrit parameter for water/ice conversion (258)
43!!\param dtime physics time step
44!!\param zuo normalized mass flux profile
45!!\param xmb_out base mass flux
46!!\param kbcon convective cloud base
47!!\param ktop cloud top
48!!\param k22 level of updraft originating air
49!!\param ierr error flag
50!!\param ierrc error description
51!!\param outt temperature tendency (k/s)
52!!\param outq mixing ratio tendency (kg/kg/s)
53!!\param outqc cloud water/ice tendency (kg/kg/s)
54!!\param outu x wind tendency
55!!\param outv y wind tendency
56!!\param pre precip rate (mm/s)
57!!\param cupclw incloud mixing ratio of cloudwater/ice (for radiation)
58!! this needs heavy tuning factors, since cloud fraction is
59!! not included (kg/kg)
60!!\param cnvwt required for gfs physics
61!!\param itf,ktf,its,ite, kts,kte are dimensions
62!!\param ipr horizontal index of printed column
63!!\param tropics =0
64!>\section gen_cu_gf_sh_run Grell-Freitas Shallow Convection General Algorithm
65 subroutine cu_gf_sh_run ( &
66 us,vs,zo,t,q,z1,tn,qo,po,psur,dhdt,kpbl,rho, & ! input variables, must be supplied
67 hfx,qfx,xland,ichoice,tcrit,dtime, &
68 zuo,xmb_out,kbcon,ktop,k22,ierr,ierrc, &
69 outt,outq,outqc,outu,outv,cnvwt,pre,cupclw, & ! output tendencies
70 itf,ktf,its,ite, kts,kte,ipr,tropics) ! dimesnional variables
71!
72! this module needs some subroutines from gf_deep
73!
77 implicit none
78 integer &
79 ,intent (in ) :: &
80 itf,ktf, &
81 its,ite, kts,kte,ipr
82 logical :: make_calc_for_xk = .true.
83 integer, intent (in ) :: &
84 ichoice
85 !
86 !
87 !
88 ! outtem = output temp tendency (per s)
89 ! outq = output q tendency (per s)
90 ! outqc = output qc tendency (per s)
91 ! pre = output precip
92 real(kind=kind_phys), dimension (its:ite,kts:kte) &
93 ,intent (inout ) :: &
94 cnvwt,outt,outq,outqc,cupclw,zuo,outu,outv
95!$acc declare copy(cnvwt,outt,outq,outqc,cupclw,zuo,outu,outv)
96 real(kind=kind_phys), dimension (its:ite) &
97 ,intent (out ) :: &
98 xmb_out
99 integer, dimension (its:ite) &
100 ,intent (inout ) :: &
101 ierr
102 integer, dimension (its:ite) &
103 ,intent (out ) :: &
104 kbcon,ktop,k22
105 integer, dimension (its:ite) &
106 ,intent (in ) :: &
107 kpbl,tropics
108!$acc declare copyout(xmb_out,kbcon,ktop,k22) copyin(kpbl,tropics) copy(ierr)
109 !
110 ! basic environmental input includes a flag (ierr) to turn off
111 ! convection for this call only and at that particular gridpoint
112 !
113 real(kind=kind_phys), dimension (its:ite,kts:kte) &
114 ,intent (in ) :: &
115 t,po,tn,dhdt,rho,us,vs
116 real(kind=kind_phys), dimension (its:ite,kts:kte) &
117 ,intent (inout) :: &
118 q,qo
119 real(kind=kind_phys), dimension (its:ite) &
120 ,intent (in ) :: &
121 xland,z1,psur,hfx,qfx
122
123 real(kind=kind_phys) &
124 ,intent (in ) :: &
125 dtime,tcrit
126!$acc declare copyin(t,po,tn,dhdt,rho,us,vs) copy(q,qo) copyin(xland,z1,psur,hfx,qfx) copyin(dtime,tcrit)
127 !
128 !***************** the following are your basic environmental
129 ! variables. they carry a "_cup" if they are
130 ! on model cloud levels (staggered). they carry
131 ! an "o"-ending (z becomes zo), if they are the forced
132 ! variables.
133 !
134 ! z = heights of model levels
135 ! q = environmental mixing ratio
136 ! qes = environmental saturation mixing ratio
137 ! t = environmental temp
138 ! p = environmental pressure
139 ! he = environmental moist static energy
140 ! hes = environmental saturation moist static energy
141 ! z_cup = heights of model cloud levels
142 ! q_cup = environmental q on model cloud levels
143 ! qes_cup = saturation q on model cloud levels
144 ! t_cup = temperature (kelvin) on model cloud levels
145 ! p_cup = environmental pressure
146 ! he_cup = moist static energy on model cloud levels
147 ! hes_cup = saturation moist static energy on model cloud levels
148 ! gamma_cup = gamma on model cloud levels
149 ! dby = buoancy term
150 ! entr = entrainment rate
151 ! bu = buoancy term
152 ! gamma_cup = gamma on model cloud levels
153 ! qrch = saturation q in cloud
154 ! pwev = total normalized integrated evaoprate (i2)
155 ! z1 = terrain elevation
156 ! psur = surface pressure
157 ! zu = updraft normalized mass flux
158 ! kbcon = lfc of parcel from k22
159 ! k22 = updraft originating level
160 ! ichoice = flag if only want one closure (usually set to zero!)
161 ! dby = buoancy term
162 ! ktop = cloud top (output)
163 ! xmb = total base mass flux
164 ! hc = cloud moist static energy
165 ! hkb = moist static energy at originating level
166
167 real(kind=kind_phys), dimension (its:ite,kts:kte) :: &
168 entr_rate_2d,he,hes,qes,z, &
169 heo,heso,qeso,zo, &
170 xhe,xhes,xqes,xz,xt,xq, &
171 qes_cup,q_cup,he_cup,hes_cup,z_cup,p_cup,gamma_cup,t_cup, &
172 qeso_cup,qo_cup,heo_cup,heso_cup,zo_cup,po_cup,gammao_cup, &
173 tn_cup, &
174 xqes_cup,xq_cup,xhe_cup,xhes_cup,xz_cup, &
175 xt_cup,dby,hc,zu, &
176 dbyo,qco,pwo,hco,qrco, &
177 dbyt,xdby,xhc,xzu, &
178
179 ! cd = detrainment function for updraft
180 ! dellat = change of temperature per unit mass flux of cloud ensemble
181 ! dellaq = change of q per unit mass flux of cloud ensemble
182 ! dellaqc = change of qc per unit mass flux of cloud ensemble
183
184 cd,dellah,dellaq,dellat,dellaqc,uc,vc,dellu,dellv,u_cup,v_cup
185
186!$acc declare create( &
187!$acc entr_rate_2d,he,hes,qes,z, &
188!$acc heo,heso,qeso,zo, &
189!$acc xhe,xhes,xqes,xz,xt,xq, &
190!$acc qes_cup,q_cup,he_cup,hes_cup,z_cup,p_cup,gamma_cup,t_cup, &
191!$acc qeso_cup,qo_cup,heo_cup,heso_cup,zo_cup,po_cup,gammao_cup, &
192!$acc tn_cup, &
193!$acc xqes_cup,xq_cup,xhe_cup,xhes_cup,xz_cup, &
194!$acc xt_cup,dby,hc,zu, &
195!$acc dbyo,qco,pwo,hco,qrco, &
196!$acc dbyt,xdby,xhc,xzu, &
197!$acc cd,dellah,dellaq,dellat,dellaqc,uc,vc,dellu,dellv,u_cup,v_cup)
198
199 ! aa0 cloud work function for downdraft
200 ! aa0 = cloud work function without forcing effects
201 ! aa1 = cloud work function with forcing effects
202 ! xaa0 = cloud work function with cloud effects (ensemble dependent)
203
204 real(kind=kind_phys), dimension (its:ite) :: &
205 zws,ztexec,zqexec,pre,aa1,aa0,xaa0,hkb, &
206 flux_tun,hkbo,xhkb, &
207 rand_vmas,xmbmax,xmb, &
208 cap_max,entr_rate, &
209 cap_max_increment,lambau
210 integer, dimension (its:ite) :: &
211 kstabi,xland1,kbmax,ktopx
212!$acc declare create( &
213!$acc zws,ztexec,zqexec,pre,aa1,aa0,xaa0,hkb, &
214!$acc flux_tun,hkbo,xhkb, &
215!$acc rand_vmas,xmbmax,xmb, &
216!$acc cap_max,entr_rate, &
217!$acc cap_max_increment,lambau, &
218!$acc kstabi,xland1,kbmax,ktopx)
219
220 integer :: &
221 kstart,i,k,ki
222 real(kind=kind_phys) :: &
223 dz,mbdt,zkbmax, &
224 cap_maxs,trash,trash2,frh
225
226 real(kind=kind_phys) buo_flux,pgeoh,dp,entup,detup,totmas
227
228 real(kind=kind_phys) xff_shal(3),blqe,xkshal
229 character*50 :: ierrc(its:ite)
230 real(kind=kind_phys), dimension (its:ite,kts:kte) :: &
231 up_massentr,up_massdetr,up_massentro,up_massdetro,up_massentru,up_massdetru
232!$acc declare create(up_massentr,up_massdetr,up_massentro,up_massdetro,up_massentru,up_massdetru)
233 real(kind=kind_phys) :: c_up,x_add,qaver,dts,fp,fpi
234 real(kind=kind_phys), dimension (its:ite,kts:kte) :: c1d,dtempdz
235 integer, dimension (its:ite,kts:kte) :: k_inv_layers
236 integer, dimension (its:ite) :: start_level, pmin_lev
237!$acc declare create(c1d,dtempdz,k_inv_layers,start_level, pmin_lev)
238
239 real(kind=kind_phys), parameter :: zero = 0
240
241!$acc kernels
242 start_level(:)=0
243 rand_vmas(:)=0.
244 flux_tun(:)=fluxtune
245 lambau(:)=2.
246 c1d(:,:)=0.
247!$acc end kernels
248
249!$acc kernels
250 do i=its,itf
251 xland1(i)=int(xland(i)+.001) ! 1.
252 ktopx(i)=0
253 if(xland(i).gt.1.5 .or. xland(i).lt.0.5)then
254 xland1(i)=0
255! ierr(i)=100
256 endif
257 pre(i)=0.
258 xmb_out(i)=0.
259 cap_max_increment(i)=25.
260 entr_rate(i) = 1.e-3 !9.e-5 ! 1.75e-3 ! 1.2e-3 ! .2/50.
261 enddo
262!$acc end kernels
263
264 do i=its,itf
265 ierrc(i)=" "
266 enddo
267!
268!--- initial entrainment rate (these may be changed later on in the
269!--- program
270!
271
272!
273!> - Initial detrainmentrates
274!
275!$acc kernels
276 do k=kts,ktf
277 do i=its,itf
278 up_massentro(i,k)=0.
279 up_massdetro(i,k)=0.
280 up_massentru(i,k)=0.
281 up_massdetru(i,k)=0.
282 z(i,k)=zo(i,k)
283 xz(i,k)=zo(i,k)
284 qrco(i,k)=0.
285 pwo(i,k)=0.
286 cd(i,k)=.75*entr_rate(i)
287 dellaqc(i,k)=0.
288 cupclw(i,k)=0.
289 enddo
290 enddo
291!$acc end kernels
292!
293!--- max/min allowed value for epsilon (ratio downdraft base mass flux/updraft
294!
295!--- minimum depth (m), clouds must have
296!
297!
298!--- maximum depth (mb) of capping
299!--- inversion (larger cap = no convection)
300!
301!$acc kernels
302 cap_maxs=175.
303 do i=its,itf
304 kbmax(i)=1
305 aa0(i)=0.
306 aa1(i)=0.
307 enddo
308 do i=its,itf
309 cap_max(i)=cap_maxs
310 ztexec(i) = 0.
311 zqexec(i) = 0.
312 zws(i) = 0.
313 enddo
314 do i=its,itf
315 !- buoyancy flux (h+le)
316 buo_flux= (hfx(i)/cp+0.608*t(i,1)*qfx(i)/xlv)/rho(i,1)
317 pgeoh = zo(i,2)*g
318 !-convective-scale velocity w*
319 zws(i) = max(0.,flux_tun(i)*0.41*buo_flux*zo(i,2)*g/t(i,1))
320 if(zws(i) > tiny(pgeoh)) then
321 !-convective-scale velocity w*
322 zws(i) = 1.2*zws(i)**.3333
323 !- temperature excess
324 ztexec(i) = max(flux_tun(i)*hfx(i)/(rho(i,1)*zws(i)*cp),0.0)
325 !- moisture excess
326 zqexec(i) = max(flux_tun(i)*qfx(i)/xlv/(rho(i,1)*zws(i)),0.)
327 endif
328 !> - Calculate zws for shallow convection closure (grant 2001)
329 !- height of the pbl
330 zws(i) = max(0.,flux_tun(i)*0.41*buo_flux*zo(i,kpbl(i))*g/t(i,kpbl(i)))
331 zws(i) = 1.2*zws(i)**.3333
332 zws(i) = zws(i)*rho(i,kpbl(i)) !check if zrho is correct
333
334 enddo
335!$acc end kernels
336!
337!> - Determin max height(m) above ground where updraft air can originate
338!
339 zkbmax=3000.
340!
341!> - Call cup_env() to calculate moist static energy, heights, qes
342!
343 call cup_env(z,qes,he,hes,t,q,po,z1, &
344 psur,ierr,tcrit,-1, &
345 itf,ktf, &
346 its,ite, kts,kte)
347 call cup_env(zo,qeso,heo,heso,tn,qo,po,z1, &
348 psur,ierr,tcrit,-1, &
349 itf,ktf, &
350 its,ite, kts,kte)
351
352!
353!> - Call cup_env_clev() to calculate environmental values on cloud levels
354!
355 call cup_env_clev(t,qes,q,he,hes,z,po,qes_cup,q_cup,he_cup, &
356 hes_cup,z_cup,p_cup,gamma_cup,t_cup,psur, &
357 ierr,z1, &
358 itf,ktf, &
359 its,ite, kts,kte)
360 call cup_env_clev(tn,qeso,qo,heo,heso,zo,po,qeso_cup,qo_cup, &
361 heo_cup,heso_cup,zo_cup,po_cup,gammao_cup,tn_cup,psur, &
362 ierr,z1, &
363 itf,ktf, &
364 its,ite, kts,kte)
365
366!$acc kernels
367 do i=its,itf
368 if(ierr(i).eq.0)then
369 u_cup(i,kts)=us(i,kts)
370 v_cup(i,kts)=vs(i,kts)
371 do k=kts+1,ktf
372 u_cup(i,k)=.5*(us(i,k-1)+us(i,k))
373 v_cup(i,k)=.5*(vs(i,k-1)+vs(i,k))
374 enddo
375 endif
376 enddo
377
378 do i=its,itf
379 if(ierr(i).eq.0)then
380!
381!$acc loop seq
382 do k=kts,ktf
383 if(zo_cup(i,k).gt.zkbmax+z1(i))then
384 kbmax(i)=k
385 go to 25
386 endif
387 enddo
388 25 continue
389!
390 kbmax(i)=min(kbmax(i),ktf/2)
391 endif
392 enddo
393!$acc end kernels
394
395!
396!
397!
398!> - Determine level with highest moist static energy content (\p k22)
399!
400!$acc parallel loop
401 do 36 i=its,itf
402 if(kpbl(i).gt.3)cap_max(i)=po_cup(i,kpbl(i))
403 if(ierr(i) == 0)then
404 k22(i)=maxloc(heo_cup(i,2:kbmax(i)),1)
405 k22(i)=max(2,k22(i))
406 if(k22(i).gt.kbmax(i))then
407 ierr(i)=2
408#ifndef _OPENACC
409 ierrc(i)="could not find k22"
410#endif
411 ktop(i)=0
412 k22(i)=0
413 kbcon(i)=0
414 endif
415 endif
416 36 continue
417!$acc end parallel
418!
419!> - Call get_cloud_bc() and cup_kbcon() to determine the level of
420!! convective cloud base (\p kbcon)
421!
422!$acc parallel loop private(x_add)
423 do i=its,itf
424 if(ierr(i).eq.0)then
425 x_add = xlv*zqexec(i)+cp*ztexec(i)
426 call get_cloud_bc(kte,he_cup(i,1:kte),hkb(i),k22(i),x_add)
427 call get_cloud_bc(kte,heo_cup(i,1:kte),hkbo(i),k22(i),x_add)
428 endif ! ierr
429 enddo
430!$acc end parallel
431
432!joe-georg and saulo's new idea:
433
434!$acc kernels
435 do i=its,itf
436 do k=kts,ktf
437 dbyo(i,k)= 0. !hkbo(i)-heso_cup(i,k)
438 enddo
439 enddo
440!$acc end kernels
441
442
443 call cup_kbcon(ierrc,cap_max_increment,5,k22,kbcon,heo_cup,heso_cup, &
444 hkbo,ierr,kbmax,po_cup,cap_max, &
445 ztexec,zqexec, &
446 0,itf,ktf, &
447 its,ite, kts,kte, &
448 z_cup,entr_rate,heo,0)
449
450!> - Call cup_minimi() and get_inversion_layers() to get inversion layers for cloud tops
451 call cup_minimi(heso_cup,kbcon,kbmax,kstabi,ierr, &
452 itf,ktf, &
453 its,ite, kts,kte)
454!
455 call get_inversion_layers(ierr,p_cup,t_cup,z_cup,q_cup,qes_cup,k_inv_layers,&
456 kbcon,kstabi,dtempdz,itf,ktf,its,ite, kts,kte)
457!
458!
459!$acc parallel loop private(frh,kstart,x_add)
460 do i=its,itf
461 entr_rate_2d(i,:)=entr_rate(i)
462 if(ierr(i) == 0)then
463 start_level(i)=k22(i)
464 x_add = xlv*zqexec(i)+cp*ztexec(i)
465 call get_cloud_bc(kte,he_cup(i,1:kte),hkb(i),k22(i),x_add)
466 if(kbcon(i).gt.ktf-4)then
467 ierr(i)=231
468 endif
469 do k=kts,ktf
470 frh = 2.*min(qo_cup(i,k)/qeso_cup(i,k),1.)
471 entr_rate_2d(i,k)=entr_rate(i) !*(2.3-frh)
472 cd(i,k)=.75*entr_rate_2d(i,k)
473 enddo
474!
475! first estimate for shallow convection
476!
477 ktop(i)=1
478 kstart=kpbl(i)
479 if(kpbl(i).lt.5)kstart=kbcon(i)
480! if(k_inv_layers(i,1).gt.0)then
481!! ktop(i)=min(k_inv_layers(i,1),k_inv_layers(i,2))
482 if(k_inv_layers(i,1).gt.0 .and. &
483 (po_cup(i,kstart)-po_cup(i,k_inv_layers(i,1))).lt.200.)then
484 ktop(i)=k_inv_layers(i,1)
485 else
486 do k=kbcon(i)+1,ktf
487 if((po_cup(i,kstart)-po_cup(i,k)).gt.200.)then
488 ktop(i)=k
489 exit
490 endif
491 enddo
492 endif
493 endif
494 enddo
495!$acc end parallel
496!> - Call rates_up_pdf() to get normalized mass flux profile
497 call rates_up_pdf(rand_vmas,ipr,'shallow',ktop,ierr,po_cup,entr_rate_2d,hkbo,heo,heso_cup,zo_cup, &
498 xland1,kstabi,k22,kbcon,its,ite,itf,kts,kte,ktf,zuo,kpbl,ktopx,kbcon,pmin_lev)
499!$acc kernels
500 do i=its,itf
501 if(ierr(i).eq.0)then
502! do k=maxloc(zuo(i,:),1),1,-1 ! ktop(i)-1,1,-1
503! if(zuo(i,k).lt.1.e-6)then
504! k22(i)=k+1
505! start_level(i)=k22(i)
506! exit
507! endif
508! enddo
509 if(k22(i).gt.1)then
510!$acc loop independent
511 do k=1,k22(i)-1
512 zuo(i,k)=0.
513 zu(i,k)=0.
514 xzu(i,k)=0.
515 enddo
516 endif
517!$acc loop seq
518 do k=maxloc(zuo(i,:),1),ktop(i)
519 if(zuo(i,k).lt.1.e-6)then
520 ktop(i)=k-1
521 exit
522 endif
523 enddo
524!$acc loop independent
525 do k=k22(i),ktop(i)
526 xzu(i,k)= zuo(i,k)
527 zu(i,k)= zuo(i,k)
528 enddo
529!$acc loop independent
530 do k=ktop(i)+1,ktf
531 zuo(i,k)=0.
532 zu(i,k)=0.
533 xzu(i,k)=0.
534 enddo
535 k22(i)=max(2,k22(i))
536 endif
537 enddo
538!$acc end kernels
539!
540!> - Call get_lateral_massflux() to calculate mass entrainment and detrainment
541!
542 call get_lateral_massflux(itf,ktf, its,ite, kts,kte &
543 ,ierr,ktop,zo_cup,zuo,cd,entr_rate_2d &
544 ,up_massentro, up_massdetro ,up_massentr, up_massdetr &
545 ,2,kbcon,k22,up_massentru,up_massdetru,lambau)
546!$acc kernels
547 do k=kts,ktf
548 do i=its,itf
549 hc(i,k)=0.
550 qco(i,k)=0.
551 qrco(i,k)=0.
552 dby(i,k)=0.
553 hco(i,k)=0.
554 dbyo(i,k)=0.
555 enddo
556 enddo
557 do i=its,itf
558 if(ierr(i) /= 0) cycle
559 do k=1,start_level(i)
560 uc(i,k)=u_cup(i,k)
561 vc(i,k)=v_cup(i,k)
562 enddo
563 do k=1,start_level(i)-1
564 hc(i,k)=he_cup(i,k)
565 hco(i,k)=heo_cup(i,k)
566 enddo
567 k=start_level(i)
568 hc(i,k)=hkb(i)
569 hco(i,k)=hkbo(i)
570 enddo
571!$acc end kernels
572!
573!
574
575!$acc parallel loop private(ki,qaver,k,trash,trash2,dz,dp)
576 do 42 i=its,itf
577 dbyt(i,:)=0.
578 if(ierr(i) /= 0) cycle
579!$acc loop seq
580 do k=start_level(i)+1,ktop(i)
581 hc(i,k)=(hc(i,k-1)*zu(i,k-1)-.5*up_massdetr(i,k-1)*hc(i,k-1)+ &
582 up_massentr(i,k-1)*he(i,k-1)) / &
583 (zu(i,k-1)-.5*up_massdetr(i,k-1)+up_massentr(i,k-1))
584 uc(i,k)=(uc(i,k-1)*zu(i,k-1)-.5*up_massdetr(i,k-1)*uc(i,k-1)+ &
585 up_massentr(i,k-1)*us(i,k-1)) / &
586 (zu(i,k-1)-.5*up_massdetr(i,k-1)+up_massentr(i,k-1))
587 vc(i,k)=(vc(i,k-1)*zu(i,k-1)-.5*up_massdetr(i,k-1)*vc(i,k-1)+ &
588 up_massentr(i,k-1)*vs(i,k-1))/ &
589 (zu(i,k-1)-.5*up_massdetr(i,k-1)+up_massentr(i,k-1))
590 dby(i,k)=max(0.,hc(i,k)-hes_cup(i,k))
591 hco(i,k)=(hco(i,k-1)*zuo(i,k-1)-.5*up_massdetro(i,k-1)*hco(i,k-1)+ &
592 up_massentro(i,k-1)*heo(i,k-1)) / &
593 (zuo(i,k-1)-.5*up_massdetro(i,k-1)+up_massentro(i,k-1))
594 dbyo(i,k)=hco(i,k)-heso_cup(i,k)
595 dz=zo_cup(i,k+1)-zo_cup(i,k)
596 if(k.ge.kbcon(i))dbyt(i,k)=dbyt(i,k-1)+dbyo(i,k)*dz
597 enddo
598 ki=maxloc(dbyt(i,:),1)
599 if(ktop(i).gt.ki+1)then
600 ktop(i)=ki+1
601 zuo(i,ktop(i)+1:ktf)=0.
602 zu(i,ktop(i)+1:ktf)=0.
603 cd(i,ktop(i)+1:ktf)=0.
604 up_massdetro(i,ktop(i))=zuo(i,ktop(i))
605! up_massentro(i,ktop(i))=0.
606 up_massentro(i,ktop(i):ktf)=0.
607 up_massdetro(i,ktop(i)+1:ktf)=0.
608 entr_rate_2d(i,ktop(i)+1:ktf)=0.
609
610! ierr(i)=423
611 endif
612
613 if(ktop(i).lt.kbcon(i)+1)then
614 ierr(i)=5
615#ifndef _OPENACC
616 ierrc(i)='ktop is less than kbcon+1'
617#endif
618 go to 42
619 endif
620 if(ktop(i).gt.ktf-2)then
621 ierr(i)=5
622#ifndef _OPENACC
623 ierrc(i)="ktop is larger than ktf-2"
624#endif
625 go to 42
626 endif
627!
628 call get_cloud_bc(kte,qo_cup(i,1:kte),qaver,k22(i),zero)
629 qaver = qaver + zqexec(i)
630 do k=1,start_level(i)-1
631 qco(i,k)= qo_cup(i,k)
632 enddo
633 k=start_level(i)
634 qco(i,k)= qaver
635!
636!$acc loop seq
637 do k=start_level(i)+1,ktop(i)
638 trash=qeso_cup(i,k)+(1./xlv)*(gammao_cup(i,k) &
639 /(1.+gammao_cup(i,k)))*dbyo(i,k)
640 !- total water liq+vapour
641 trash2 = qco(i,k-1) ! +qrco(i,k-1)
642 qco(i,k)= (trash2* ( zuo(i,k-1)-0.5*up_massdetr(i,k-1)) + &
643 up_massentr(i,k-1)*qo(i,k-1)) / &
644 (zuo(i,k-1)-.5*up_massdetr(i,k-1)+up_massentr(i,k-1))
645
646 if(qco(i,k)>=trash ) then
647 dz=z_cup(i,k)-z_cup(i,k-1)
648 ! cloud liquid water
649 c1d(i,k)=.02*up_massdetr(i,k-1)
650 qrco(i,k)= (qco(i,k)-trash)/(1.+(c0_shal+c1d(i,k))*dz)
651 if(qrco(i,k).lt.0.)then ! hli new test 02/12/19
652 qrco(i,k)=0.
653 c1d(i,k)=0.
654 endif
655 pwo(i,k)=c0_shal*dz*qrco(i,k)*zuo(i,k)
656 ! cloud water vapor
657 qco(i,k)= trash+qrco(i,k)
658
659 else
660 qrco(i,k)= 0.0
661 endif
662 cupclw(i,k)=qrco(i,k)
663 enddo
664 trash=0.
665 trash2=0.
666!$acc loop independent
667 do k=k22(i)+1,ktop(i)
668 dp=100.*(po_cup(i,k)-po_cup(i,k+1))
669 cnvwt(i,k)=zuo(i,k)*cupclw(i,k)*g/dp
670!$acc atomic
671 trash2=trash2+entr_rate_2d(i,k)
672!$acc atomic
673 qco(i,k)=qco(i,k)-qrco(i,k)
674 enddo
675!$acc loop independent
676 do k=k22(i)+1,max(kbcon(i),k22(i)+1)
677!$acc atomic
678 trash=trash+entr_rate_2d(i,k)
679 enddo
680!$acc loop independent
681 do k=ktop(i)+1,ktf-1
682 hc(i,k)=hes_cup(i,k)
683 hco(i,k)=heso_cup(i,k)
684 qco(i,k)=qeso_cup(i,k)
685 uc(i,k)=u_cup(i,k)
686 vc(i,k)=v_cup(i,k)
687 qrco(i,k)=0.
688 dby(i,k)=0.
689 dbyo(i,k)=0.
690 zu(i,k)=0.
691 xzu(i,k)=0.
692 zuo(i,k)=0.
693 enddo
694 42 continue
695!$acc end parallel
696!
697!--- calculate workfunctions for updrafts
698!
699 if(make_calc_for_xk) then
700 call cup_up_aa0(aa0,z,zu,dby,gamma_cup,t_cup, &
701 kbcon,ktop,ierr, &
702 itf,ktf, its,ite, kts,kte)
703 call cup_up_aa0(aa1,zo,zuo,dbyo,gammao_cup,tn_cup, &
704 kbcon,ktop,ierr, &
705 itf,ktf, its,ite, kts,kte)
706!$acc kernels
707 do i=its,itf
708 if(ierr(i) == 0)then
709 if(aa1(i) <= 0.)then
710 ierr(i)=17
711#ifndef _OPENACC
712 ierrc(i)="cloud work function zero"
713#endif
714 endif
715 endif
716 enddo
717!$acc end kernels
718 endif
719!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
720!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
721
722!
723!--- change per unit mass that a model cloud would modify the environment
724!
725!--- 1. in bottom layer
726!
727!$acc kernels
728 do k=kts,kte
729 do i=its,itf
730 dellah(i,k)=0.
731 dellaq(i,k)=0.
732 dellaqc(i,k)=0.
733 dellu(i,k)=0.
734 dellv(i,k)=0.
735 enddo
736 enddo
737!$acc end kernels
738!
739!---------------------------------------------- cloud level ktop
740!
741!- - - - - - - - - - - - - - - - - - - - - - - - model level ktop-1
742! . . .
743! . . .
744! . . .
745! . . .
746! . . .
747! . . .
748!
749!---------------------------------------------- cloud level k+2
750!
751!- - - - - - - - - - - - - - - - - - - - - - - - model level k+1
752!
753!---------------------------------------------- cloud level k+1
754!
755!- - - - - - - - - - - - - - - - - - - - - - - - model level k
756!
757!---------------------------------------------- cloud level k
758!
759! . . .
760! . . .
761! . . .
762! . . .
763! . . .
764! . . .
765! . . .
766! . . .
767! . . .
768! . . .
769!
770!---------------------------------------------- cloud level 3
771!
772!- - - - - - - - - - - - - - - - - - - - - - - - model level 2
773!
774!---------------------------------------------- cloud level 2
775!
776!- - - - - - - - - - - - - - - - - - - - - - - - model level 1
777 trash2=0.
778!$acc kernels
779!$acc loop independent
780 do i=its,itf
781 if(ierr(i).eq.0)then
782 dp=100.*(po_cup(i,1)-po_cup(i,2))
783 dellu(i,1)= -zuo(i,2)*(uc(i,2)-u_cup(i,2)) *g/dp
784 dellv(i,1)= -zuo(i,2)*(vc(i,2)-v_cup(i,2)) *g/dp
785 dellah(i,1)=-zuo(i,2)*(hco(i,2)-heo_cup(i,2))*g/dp
786
787 dellaq(i,1)=-zuo(i,2)*(qco(i,2)-qo_cup(i,2))*g/dp
788
789 do k=k22(i),ktop(i)
790 ! entrainment/detrainment for updraft
791 entup=up_massentro(i,k)
792 detup=up_massdetro(i,k)
793 totmas=detup-entup+zuo(i,k+1)-zuo(i,k)
794#ifndef _OPENACC
795 if(abs(totmas).gt.1.e-6)then
796 write(0,*)'*********************',i,k,totmas
797 write(0,*)k22(i),kbcon(i),ktop(i)
798 endif
799#endif
800 dp=100.*(po_cup(i,k)-po_cup(i,k+1))
801 dellah(i,k) =-(zuo(i,k+1)*(hco(i,k+1)-heo_cup(i,k+1) )- &
802 zuo(i,k )*(hco(i,k )-heo_cup(i,k ) ))*g/dp
803
804 !-- take out cloud liquid water for detrainment
805 dz=zo_cup(i,k+1)-zo_cup(i,k)
806 if(k.lt.ktop(i) .and. c1d(i,k) > 0)then
807 dellaqc(i,k)= zuo(i,k)*c1d(i,k)*qrco(i,k)*dz/dp*g ! detup*0.5*(qrco(i,k+1)+qrco(i,k)) *g/dp
808 else
809 dellaqc(i,k)=detup*0.5*(qrco(i,k+1)+qrco(i,k)) *g/dp
810! dellaqc(i,k)= detup*qrco(i,k) *g/dp
811 endif
812
813 !-- condensation source term = detrained + flux divergence of
814 !-- cloud liquid water (qrco)
815 c_up = dellaqc(i,k)+(zuo(i,k+1)* qrco(i,k+1) - &
816 zuo(i,k )* qrco(i,k ) )*g/dp
817! c_up = dellaqc(i,k)
818 !-- water vapor budget (flux divergence of q_up-q_env - condensation
819 !term)
820 dellaq(i,k) =-(zuo(i,k+1)*(qco(i,k+1)-qo_cup(i,k+1) ) - &
821 zuo(i,k )*(qco(i,k )-qo_cup(i,k ) ) )*g/dp &
822 - c_up - 0.5*(pwo(i,k)+pwo(i,k+1))*g/dp
823 dellu(i,k) =-(zuo(i,k+1)*(uc(i,k+1)-u_cup(i,k+1) ) - &
824 zuo(i,k )*(uc(i,k )-u_cup(i,k ) ) )*g/dp
825 dellv(i,k) =-(zuo(i,k+1)*(vc(i,k+1)-v_cup(i,k+1) ) - &
826 zuo(i,k )*(vc(i,k )-v_cup(i,k ) ) )*g/dp
827
828 enddo
829 endif
830 enddo
831!$acc end kernels
832
833!
834!--- using dellas, calculate changed environmental profiles
835!
836 mbdt=.5 !3.e-4
837!$acc kernels
838 do k=kts,ktf
839 do i=its,itf
840 dellat(i,k)=0.
841 if(ierr(i)/=0)cycle
842 xhe(i,k)=dellah(i,k)*mbdt+heo(i,k)
843 xq(i,k)=max(1.e-16,(dellaq(i,k)+dellaqc(i,k))*mbdt+qo(i,k))
844 dellat(i,k)=(1./cp)*(dellah(i,k)-xlv*(dellaq(i,k)))
845 xt(i,k)= (-dellaqc(i,k)*xlv/cp+dellat(i,k))*mbdt+tn(i,k)
846 xt(i,k)= max(190.,xt(i,k))
847
848 enddo
849 enddo
850 do i=its,itf
851 if(ierr(i).eq.0)then
852! xhkb(i)=hkbo(i)+(dellah(i,k22(i)))*mbdt
853 xhe(i,ktf)=heo(i,ktf)
854 xq(i,ktf)=qo(i,ktf)
855 xt(i,ktf)=tn(i,ktf)
856 endif
857 enddo
858!$acc end kernels
859!
860!
861 if(make_calc_for_xk) then
862!
863!--- calculate moist static energy, heights, qes
864!
865 call cup_env(xz,xqes,xhe,xhes,xt,xq,po,z1, &
866 psur,ierr,tcrit,-1, &
867 itf,ktf, &
868 its,ite, kts,kte)
869!
870!--- environmental values on cloud levels
871!
872 call cup_env_clev(xt,xqes,xq,xhe,xhes,xz,po,xqes_cup,xq_cup, &
873 xhe_cup,xhes_cup,xz_cup,po_cup,gamma_cup,xt_cup,psur, &
874 ierr,z1, &
875 itf,ktf, &
876 its,ite, kts,kte)
877!
878!
879!**************************** static control
880!$acc kernels
881 do k=kts,ktf
882 do i=its,itf
883 xhc(i,k)=0.
884 xdby(i,k)=0.
885 enddo
886 enddo
887!$acc end kernels
888
889!$acc parallel loop private(x_add)
890 do i=its,itf
891 if(ierr(i).eq.0)then
892 x_add = xlv*zqexec(i)+cp*ztexec(i)
893 call get_cloud_bc(kte,xhe_cup(i,1:kte),xhkb(i),k22(i),x_add)
894 do k=1,start_level(i)-1
895 xhc(i,k)=xhe_cup(i,k)
896 enddo
897 k=start_level(i)
898 xhc(i,k)=xhkb(i)
899 endif !ierr
900 enddo
901!$acc end parallel
902!
903!
904!$acc kernels
905 do i=its,itf
906 if(ierr(i).eq.0)then
907 xzu(i,1:ktf)=zuo(i,1:ktf)
908!$acc loop seq
909 do k=start_level(i)+1,ktop(i)
910 xhc(i,k)=(xhc(i,k-1)*xzu(i,k-1)-.5*up_massdetro(i,k-1)*xhc(i,k-1)+ &
911 up_massentro(i,k-1)*xhe(i,k-1)) / &
912 (xzu(i,k-1)-.5*up_massdetro(i,k-1)+up_massentro(i,k-1))
913 xdby(i,k)=xhc(i,k)-xhes_cup(i,k)
914 enddo
915!$acc loop independent
916 do k=ktop(i)+1,ktf
917 xhc(i,k)=xhes_cup(i,k)
918 xdby(i,k)=0.
919 xzu(i,k)=0.
920 enddo
921 endif
922 enddo
923!$acc end kernels
924
925!
926!--- workfunctions for updraft
927!
928 call cup_up_aa0(xaa0,xz,xzu,xdby,gamma_cup,xt_cup, &
929 kbcon,ktop,ierr, &
930 itf,ktf, &
931 its,ite, kts,kte)
932!
933 endif
934!
935!
936! now for shallow forcing
937!
938!$acc kernels
939!$acc loop private(xff_shal)
940 do i=its,itf
941 xmb(i)=0.
942 xff_shal(1:3)=0.
943 if(ierr(i).eq.0)then
944 xmbmax(i)=1.0
945! xmbmax(i)=100.*(p(i,kbcon(i))-p(i,kbcon(i)+1))/(g*dtime)
946!
947!-stabilization closure
948 xkshal=(xaa0(i)-aa1(i))/mbdt
949 if(xkshal.le.0.and.xkshal.gt.-.01*mbdt) &
950 xkshal=-.01*mbdt
951 if(xkshal.gt.0.and.xkshal.lt.1.e-2) &
952 xkshal=1.e-2
953
954 xff_shal(1)=max(0.,-(aa1(i)-aa0(i))/(xkshal*dtime))
955!
956!- closure from grant (2001)
957 xff_shal(2)=.03*zws(i)
958!- boundary layer qe closure
959 blqe=0.
960 trash=0.
961 do k=1,kbcon(i)
962 blqe=blqe+100.*dhdt(i,k)*(po_cup(i,k)-po_cup(i,k+1))/g
963 enddo
964 trash=max((hc(i,kbcon(i))-he_cup(i,kbcon(i))),1.e1)
965 xff_shal(3)=max(0.,blqe/trash)
966 xff_shal(3)=min(xmbmax(i),xff_shal(3))
967!- average
968 xmb(i)=(xff_shal(1)+xff_shal(2)+xff_shal(3))/3.
969 xmb(i)=min(xmbmax(i),xmb(i))
970 if(ichoice > 0)xmb(i)=min(xmbmax(i),xff_shal(ichoice))
971 if(xmb(i) <= 0.)then
972 ierr(i)=21
973#ifndef _OPENACC
974 ierrc(i)="21"
975#endif
976 endif
977 endif
978 if(ierr(i).ne.0)then
979 k22(i)=0
980 kbcon(i)=0
981 ktop(i)=0
982 xmb(i)=0.
983 outt(i,:)=0.
984 outu(i,:)=0.
985 outv(i,:)=0.
986 outq(i,:)=0.
987 outqc(i,:)=0.
988 else if(ierr(i).eq.0)then
989 xmb_out(i)=xmb(i)
990!
991! final tendencies
992!
993 pre(i)=0.
994!$acc loop independent
995 do k=2,ktop(i)
996 outt(i,k)= dellat(i,k)*xmb(i)
997 outq(i,k)= dellaq(i,k)*xmb(i)
998 outqc(i,k)= dellaqc(i,k)*xmb(i)
999!$acc atomic
1000 pre(i) = pre(i)+pwo(i,k)*xmb(i)
1001 enddo
1002 outt(i,1)= dellat(i,1)*xmb(i)
1003 outq(i,1)= dellaq(i,1)*xmb(i)
1004 outu(i,1)=dellu(i,1)*xmb(i)
1005 outv(i,1)=dellv(i,1)*xmb(i)
1006 do k=kts+1,ktop(i)
1007 outu(i,k)=.25*(dellu(i,k-1)+2.*dellu(i,k)+dellu(i,k+1))*xmb(i)
1008 outv(i,k)=.25*(dellv(i,k-1)+2.*dellv(i,k)+dellv(i,k+1))*xmb(i)
1009 enddo
1010
1011 endif
1012 enddo
1013!
1014! since kinetic energy is being dissipated, add heating accordingly (from ecmwf)
1015!
1016 do i=its,itf
1017 if(ierr(i).eq.0) then
1018 dts=0.
1019 fpi=0.
1020 do k=kts,ktop(i)
1021 dp=(po_cup(i,k)-po_cup(i,k+1))*100.
1022!total ke dissiptaion estimate
1023 dts= dts -(outu(i,k)*us(i,k)+outv(i,k)*vs(i,k))*dp/g
1024! fpi needed for calcualtion of conversion to pot. energyintegrated
1025 fpi = fpi +sqrt(outu(i,k)*outu(i,k) + outv(i,k)*outv(i,k))*dp
1026 enddo
1027 if(fpi.gt.0.)then
1028 do k=kts,ktop(i)
1029 fp= sqrt((outu(i,k)*outu(i,k)+outv(i,k)*outv(i,k)))/fpi
1030 outt(i,k)=outt(i,k)+fp*dts*g/cp
1031 enddo
1032 endif
1033 endif
1034 enddo
1035!$acc end kernels
1036!
1037! done shallow
1038!--------------------------done------------------------------
1039!
1040! do k=1,30
1041! print*,'hlisq',qco(1,k),qrco(1,k),pwo(1,k)
1042! enddo
1043
1044 end subroutine cu_gf_sh_run
1045!> @}
1046end module cu_gf_sh
subroutine get_inversion_layers(ierr, p_cup, t_cup, z_cup, qo_cup, qeso_cup, k_inv_layers, kstart, kend, dtempdz, itf, ktf, its, ite, kts, kte)
Finds temperature inversions using the first and second derivative of temperature.
subroutine cup_kbcon(ierrc, cap_inc, iloop_in, k22, kbcon, he_cup, hes_cup, hkb, ierr, kbmax, p_cup, cap_max, ztexec, zqexec, jprnt, itf, ktf, its, ite, kts, kte, z_cup, entr_rate, heo, imid)
Calculates the level of convective cloud base.
subroutine get_cloud_bc(mzp, array, x_aver, k22, add)
Calculates the average value of a variable at the updraft originating level.
subroutine get_lateral_massflux(itf, ktf, its, ite, kts, kte, ierr, ktop, zo_cup, zuo, cd, entr_rate_2d, up_massentro, up_massdetro, up_massentr, up_massdetr, draft, kbcon, k22, up_massentru, up_massdetru, lambau)
Calculates mass entranment and detrainment rates.
subroutine cup_env_clev(t, qes, q, he, hes, z, p, qes_cup, q_cup, he_cup, hes_cup, z_cup, p_cup, gamma_cup, t_cup, psur, ierr, z1, itf, ktf, its, ite, kts, kte)
Calculates environmental values on cloud levels.
subroutine cup_up_aa0(aa0, z, zu, dby, gamma_cup, t_cup, kbcon, ktop, ierr, itf, ktf, its, ite, kts, kte)
Calculates the cloud work functions for updrafts.
subroutine rates_up_pdf(rand_vmas, ipr, name, ktop, ierr, p_cup, entr_rate_2d, hkbo, heo, heso_cup, z_cup, xland, kstabi, k22, kbcon, its, ite, itf, kts, kte, ktf, zuo, kpbl, ktopdby, csum, pmin_lev)
Driver for the normalized mass-flux routine.
subroutine cup_env(z, qes, he, hes, t, q, p, z1, psur, ierr, tcrit, itest, itf, ktf, its, ite, kts, kte)
Calculates environmental moist static energy, saturation moist static energy, heights,...
subroutine cup_minimi(array, ks, kend, kt, ierr, itf, ktf, its, ite, kts, kte)
Calculates the level at which the minimum value in an array occurs.
subroutine cu_gf_sh_run(us, vs, zo, t, q, z1, tn, qo, po, psur, dhdt, kpbl, rho, hfx, qfx, xland, ichoice, tcrit, dtime, zuo, xmb_out, kbcon, ktop, k22, ierr, ierrc, outt, outq, outqc, outu, outv, cnvwt, pre, cupclw, itf, ktf, its, ite, kts, kte, ipr, tropics)
Definition cu_gf_sh.F90:71
This module contains the Grell_Freitas deep convection scheme.
Definition cu_gf_deep.F90:5
This module contains the Grell-Freitas shallow convection scheme.
Definition cu_gf_sh.F90:5