VAPOR | Computational Information Systems Laboratory - Installation

Problem starting Vapor

ronald.gil.bilang_667750 — Wed, 27 Feb 2019 05:03:31 +0000

Forums:

Installation

Hi. I am a new user of Vapor. I installed VAPOR 3 following the instruction in the website. I tried opening vapor but there were errors that popped out. Unable to load library icui18n "Cannot load library icui18n: (icui18n: cannot open shared object file: No such file or directory)" And the GUI shows, InitializeGL failure OpenGL version "3.1 Mesa 18.2.2" is too low and is not supported Please help? Thank you so much.

How to start the GUI of VAPOR3 on Linux

caoxx409_660429 — Tue, 18 Dec 2018 22:46:28 +0000

Forums:

Installation

Hi,

I followed the instructions on the website to download and install VAPOR3 on my Linux system CentOS 7. https://www.vapor.ucar.edu/docs/installation

Then under the directory ..../VAPOR3/VAPOR3-3.0.0-Linux/bin, I typed "./vapor" to try to start the GUI of VAPOR3, but an error message was given in the terminal:
vapor: error while loading shared libraries: liblzma.so.5: cannot open shared object file: No such file or directory

I'm wondering if any user environment setup is required before running VAPOR3?

Thank you for your help!

Best,
Qingfeng

Cannot mix incompatible Qt library

MATTEDOMINIC3_665440 — Thu, 17 May 2018 21:53:36 +0000

Forums:

Installation

Hello, I have linux, I went through all the different step, but somehow I am not able to start vapor. When I write vaporgui ina command line, it comlains about my library. Cannot mix incompatible Qt library (version 0x40807) with this library (version 0x40806) Aborted (core dumped) Any idea what's wrong? Thanks

how to open vapor interface in ubuntu 16.04?

devshreemandal_664714 — Thu, 11 Jan 2018 06:39:37 +0000

Forums:

Installation

I have installed binary distribution in my /usr/local path. I have executed the sh file. But how to open vapor interface?

Unable to install on Ubuntu 16.04 VAPOR dependencies

winash12_660754 — Sun, 26 Nov 2017 13:04:15 +0000

Forums:

Installation

Hello, I am installing VAPOR on a brand new box Ubuntu 16.04 LTS (32 gb ram) and I am unable to install from source the following dependencies - libgeotiff and ftgl. I am using the same version you have described in the documentation-https://www.vapor.ucar.edu/internal/downloads/source-distributions Can you guide me on how I could go about fixing the install errors so that I can use VAPOR ? Best regards, Ashwin. Here are the logs make all-recursive make[1]: Entering directory '/home/winash12/meteorology_project/ftgl-2.1.3~rc5' Making all in src make[2]: Entering directory '/home/winash12/meteorology_project/ftgl-2.1.3~rc5/src' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/winash12/meteorology_project/ftgl-2.1.3~rc5/src' Making all in test make[2]: Entering directory '/home/winash12/meteorology_project/ftgl-2.1.3~rc5/test' make[2]: Nothing to be done for 'all'. make[2]: Leaving directory '/home/winash12/meteorology_project/ftgl-2.1.3~rc5/test' Making all in demo make[2]: Entering directory '/home/winash12/meteorology_project/ftgl-2.1.3~rc5/demo' /bin/bash ../libtool --tag=CXX --mode=link g++ -I/usr/local/include/freetype2 -I/usr/local/include/libpng16 -I/usr/local/include -g -O2 -L/usr/local/lib -lfreetype -lglut -o simple simple-simple.o ../src/libftgl.la g++ -I/usr/local/include/freetype2 -I/usr/local/include/libpng16 -I/usr/local/include -g -O2 -o .libs/simple simple-simple.o -L/usr/local/lib /usr/local/lib/libfreetype.so -lglut ../src/.libs/libftgl.so /usr/bin/ld: simple-simple.o: undefined reference to symbol 'glEnable' //usr/lib/x86_64-linux-gnu/mesa/libGL.so.1: error adding symbols: DSO missing from command line collect2: error: ld returned 1 exit status Makefile:327: recipe for target 'simple' failed make[2]: *** [simple] Error 1 make[2]: Leaving directory '/home/winash12/meteorology_project/ftgl-2.1.3~rc5/demo' Makefile:338: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/winash12/meteorology_project/ftgl-2.1.3~rc5' Makefile:249: recipe for target 'all' failed make: *** [all] Error 2 make all-recursive make[1]: Entering directory '/home/winash12/meteorology_project/libgeotiff-1.4.2' Making all in libxtiff make[2]: Entering directory '/home/winash12/meteorology_project/libgeotiff-1.4.2/libxtiff' /bin/bash ../libtool --tag=CC --mode=link gcc -I../ -Iyes -DHAVE_TIFF=1 -g -O2 -O3 -DNDEBUG -o libxtiff.la xtiff.lo -lproj -Lyes -ltiff -lm ../libtool: line 6000: cd: yes: No such file or directory libtool: link: cannot determine absolute directory name of `yes' Makefile:400: recipe for target 'libxtiff.la' failed make[2]: *** [libxtiff.la] Error 1 make[2]: Leaving directory '/home/winash12/meteorology_project/libgeotiff-1.4.2/libxtiff' Makefile:836: recipe for target 'all-recursive' failed make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory '/home/winash12/meteorology_project/libgeotiff-1.4.2' Makefile:592: recipe for target 'all' failed make: *** [all] Error 2

There is no the third party for 32.

guojian409237405_664165 — Tue, 26 Sep 2017 00:45:03 +0000

Forums:

Installation

why the Vapor3rdParty2015 is just for 32 ? and there is no 3rd party for 32

CUDA and VAPOR

stma0605_657346 — Thu, 06 Jul 2017 18:48:24 +0000

Forums:

Installation

Hi All, I am setting up VAPOR on a 64 core server with 2 video cards in it. I have installed the drivers for the cards and CUDA-8.0. Is there an installation flag or a specific way I have to setup VAPOR to have the program utilize the GPU's? Thank You, Marshall Stageberg

Code: 4017 Message: No .efc files found in directory:

abhi.ujjwal_663324 — Sun, 28 May 2017 10:38:26 +0000

Forums:

Installation

Hi there !

I am new here. I downloaded the binary installation. Unpacked using tar command. Installed through vapor-install.csh in usr/local/vapor-2.6.0. Edited profile to recognize vaporgui as a command.

Now, I executed vapor-setup.sh and got the following message:

./vapor-setup.sh

######################## WARNING ##############################

The LD_LIBRARY_PATH environment variable is set.

Some VAPOR applications may fail to run correctly.

To un-set LD_LIBRARY_PATH execute: unset LD_LIBRARY_PATH

######################## WARNING ##############################

I executed "unset LD_LIBRARY_PATH" again executed vapor-setup.sh

And then vaporgui

I am receiving following two messages:

VAPOR Error

Code: 4017

Message: No .efc files found in directory:

VAPoR Banner

Could not load banner image.

I am stuck now and could not find answers in previous threads.

Please help.

Parallel VAPOR - Linux

stma0605_657346 — Tue, 22 Nov 2016 15:46:57 +0000

Forums:

Installation

Hi All, I was curious if I will have to build VAPOR from source using MPI wrappers to have it install in parallel or if there is an easier way of running vapor in parallel? Thank You Marshall

Vapor on tablet or 2 in 1 laptop

piotrows — Sun, 30 Oct 2016 10:59:41 +0000

Forums:

Installation

Dear Colleagues, Is there any large tablet/2-1 laptop hardware (Windows based) that allows to run Vapor smoothly, like Microsoft Surface Pro, Lenovo Yoga ? Thanks, Zbigniew Piotrowski