GFS Noah LSM Model

This is Noah LSM driver module, with the functionality of preparing variables to run Noah LSM gfssflx(), calling Noah LSM and post-processing variables for return to the parent model suite including unit conversion, as well as diagnotics calculation. More...

Modules
module	namelist_soilveg
	This module contains namelist options for Noah LSM.

Functions/Subroutines
subroutine, public	lsm_noah::lsm_noah_run (im, km, grav, cp, hvap, rd, eps, epsm1, rvrdm1, ps, t1, q1, soiltyp, vegtype, sigmaf, sfcemis, dlwflx, dswsfc, delt, tg3, cm, ch, prsl1, prslki, zf, land, wind, slopetyp, shdmin, shdmax, snoalb, sfalb, flag_iter, flag_guess, lheatstrg, isot, ivegsrc, bexppert, xlaipert, vegfpert, pertvegf, albdvis_lnd, albdnir_lnd, albivis_lnd, albinir_lnd, adjvisbmd, adjnirbmd, adjvisdfd, adjnirdfd, rhonewsn1, exticeden, weasd, snwdph, tskin, tprcp, srflag, smc, stc, slc, canopy, trans, tsurf, zorl, sncovr1, qsurf, gflux, drain, evap, hflx, ep, runoff, cmm, chh, evbs, evcw, sbsno, snowc, stm, snohf, smcwlt2, smcref2, wet1, lai, rca, errmsg, errflg)
subroutine, public	set_soilveg_mod::set_soilveg (me, isot, ivet, nlunit, errmsg, errflg)
	This subroutine initializes soil and vegetation.
subroutine	sflx::gfssflx (nsoil, couple, icein, ffrozp, dt, zlvl, sldpth, swdn, swnet, lwdn, sfcems, sfcprs, sfctmp, sfcspd, prcp, q2, q2sat, dqsdt2, th2, ivegsrc, vegtyp, soiltyp, slopetyp, shdmin, alb, snoalb, rhonewsn, exticeden, bexpp, xlaip, lheatstrg, tbot, cmc, t1, stc, smc, sh2o, sneqv, ch, cm, z0, nroot, shdfac, snowh, albedo, eta, sheat, ec, edir, et, ett, esnow, drip, dew, beta, etp, ssoil, flx1, flx2, flx3, runoff1, runoff2, runoff3, snomlt, sncovr, rc, pc, rsmin, xlai, rcs, rct, rcq, rcsoil, soilw, soilm, smcwlt, smcdry, smcref, smcmax, errmsg, errflg)
	This is the entity of GFS Noah LSM model of physics subroutines. It is a soil/veg/snowpack land-surface model to update soil moisture, soil ice, soil temperature, skin temperature, snowpack water content, snowdepth, and all terms of the surface energy balance and surface water balance (excluding input atmospheric forcings of downward radiation and precipitation).
subroutine	alcalc
	This subroutine calculates albedo including snow effect (0 -> 1).

Detailed Description

This is Noah LSM driver module, with the functionality of preparing variables to run Noah LSM gfssflx(), calling Noah LSM and post-processing variables for return to the parent model suite including unit conversion, as well as diagnotics calculation.

Argument Table

Noah LSM General Algorithm

Function/Subroutine Documentation

alcalc()

subroutine gfssflx::alcalc

This subroutine calculates albedo including snow effect (0 -> 1).

Definition at line 988 of file sflx.f.

Referenced by sflx::gfssflx().

Here is the caller graph for this function:

gfssflx()

subroutine sflx::gfssflx	(	integer, intent(in)	nsoil,
		integer, intent(in)	couple,
		integer, intent(in)	icein,
		real (kind=kind_phys), intent(in)	ffrozp,
		real (kind=kind_phys), intent(in)	dt,
		real (kind=kind_phys), intent(in)	zlvl,
		real (kind=kind_phys), dimension(nsoil), intent(in)	sldpth,
		real (kind=kind_phys), intent(in)	swdn,
		real (kind=kind_phys), intent(in)	swnet,
		real (kind=kind_phys), intent(in)	lwdn,
		real (kind=kind_phys), intent(in)	sfcems,
		real (kind=kind_phys), intent(in)	sfcprs,
		real (kind=kind_phys), intent(in)	sfctmp,
		real (kind=kind_phys), intent(in)	sfcspd,
		real (kind=kind_phys), intent(in)	prcp,
		real (kind=kind_phys), intent(in)	q2,
		real (kind=kind_phys), intent(in)	q2sat,
		real (kind=kind_phys), intent(in)	dqsdt2,
		real (kind=kind_phys), intent(in)	th2,
		integer, intent(in)	ivegsrc,
		integer, intent(in)	vegtyp,
		integer, intent(in)	soiltyp,
		integer, intent(in)	slopetyp,
		real (kind=kind_phys), intent(in)	shdmin,
		real (kind=kind_phys), intent(in)	alb,
		real (kind=kind_phys), intent(in)	snoalb,
		real (kind=kind_phys), intent(in)	rhonewsn,
		real (kind=kind_phys), intent(in)	exticeden,
		real (kind=kind_phys), intent(in)	bexpp,
		real (kind=kind_phys), intent(in)	xlaip,
		real (kind=kind_phys), intent(in)	lheatstrg,
		real (kind=kind_phys), intent(inout)	tbot,
		real (kind=kind_phys), intent(inout)	cmc,
		real (kind=kind_phys), intent(inout)	t1,
		real (kind=kind_phys), dimension(nsoil), intent(inout)	stc,
		real (kind=kind_phys), dimension(nsoil), intent(inout)	smc,
		real (kind=kind_phys), dimension(nsoil), intent(inout)	sh2o,
		real (kind=kind_phys), intent(inout)	sneqv,
		real (kind=kind_phys), intent(inout)	ch,
		real (kind=kind_phys), intent(inout)	cm,
		real (kind=kind_phys)	z0,
		integer, intent(out)	nroot,
		real (kind=kind_phys), intent(out)	shdfac,
		real (kind=kind_phys), intent(out)	snowh,
		real (kind=kind_phys), intent(out)	albedo,
		real (kind=kind_phys), intent(out)	eta,
		real (kind=kind_phys), intent(out)	sheat,
		real (kind=kind_phys), intent(out)	ec,
		real (kind=kind_phys), intent(out)	edir,
		real (kind=kind_phys), dimension(nsoil), intent(out)	et,
		real (kind=kind_phys), intent(out)	ett,
		real (kind=kind_phys), intent(out)	esnow,
		real (kind=kind_phys), intent(out)	drip,
		real (kind=kind_phys), intent(out)	dew,
		real (kind=kind_phys), intent(out)	beta,
		real (kind=kind_phys), intent(out)	etp,
		real (kind=kind_phys), intent(out)	ssoil,
		real (kind=kind_phys), intent(out)	flx1,
		real (kind=kind_phys), intent(out)	flx2,
		real (kind=kind_phys), intent(out)	flx3,
		real (kind=kind_phys), intent(out)	runoff1,
		real (kind=kind_phys), intent(out)	runoff2,
		real (kind=kind_phys), intent(out)	runoff3,
		real (kind=kind_phys), intent(out)	snomlt,
		real (kind=kind_phys), intent(out)	sncovr,
		real (kind=kind_phys), intent(out)	rc,
		real (kind=kind_phys), intent(out)	pc,
		real (kind=kind_phys), intent(out)	rsmin,
		real (kind=kind_phys), intent(out)	xlai,
		real (kind=kind_phys), intent(out)	rcs,
		real (kind=kind_phys), intent(out)	rct,
		real (kind=kind_phys), intent(out)	rcq,
		real (kind=kind_phys), intent(out)	rcsoil,
		real (kind=kind_phys), intent(out)	soilw,
		real (kind=kind_phys), intent(out)	soilm,
		real (kind=kind_phys), intent(out)	smcwlt,
		real (kind=kind_phys), intent(out)	smcdry,
		real (kind=kind_phys), intent(out)	smcref,
		real (kind=kind_phys), intent(out)	smcmax,
		character(len=*), intent(out)	errmsg,
		integer, intent(out)	errflg
	)

This is the entity of GFS Noah LSM model of physics subroutines. It is a soil/veg/snowpack land-surface model to update soil moisture, soil ice, soil temperature, skin temperature, snowpack water content, snowdepth, and all terms of the surface energy balance and surface water balance (excluding input atmospheric forcings of downward radiation and precipitation).

The land-surface model component was substantially upgraded from the Oregon State University (OSU) land surface model to EMC's new Noah Land Surface Model (Noah LSM) during the major implementation in the NCEP Global Forecast System (GFS) on May 31, 2005. Forecast System (GFS). The Noah LSM embodies about 10 years of upgrades (see [35], [110], [53]) to its ancestor, the OSU LSM. The Noah LSM upgrade includes:

• An increase from two (10, 190 cm thick) to four soil layers (10, 30, 60, 100 cm thick)
• Addition of frozen soil physics
• Add glacial ice treatment
• Two snowpack states (SWE, density)
• New formulations for infiltration and runoff account for sub-grid variability in precipitation and soil moisture
• Revised physics of the snowpack and its influence on surface heat fluxes and albedo
• Higher canopy resistance
• Spatially varying root depth
• Surface fluxes weighted by snow cover fraction
• Improved thermal conduction in soil/snow
• Improved seasonality of green vegetation cover.
• Improved evaporation treatment over bare soil and snowpack

Parameters

[in]	nsoil	integer, number of soil layers (>=2 but <=nsold)
[in]	couple	integer, =0:uncoupled (land model only), =1:coupled with parent atmos model
[in]	icein	integer, sea-ice flag (=1: sea-ice, =0: land)
[in]	ffrozp	real, flag for snow-rain detection (1.=snow, 0.=rain)
[in]	dt	real, time step (<3600 sec)
[in]	zlvl	real, height abv atmos ground forcing vars ( \(m\))
[in]	sldpth	real, thickness of each soil layer ( \(m\)), nsoil
[in]	swdn	real, downward SW radiation flux ( \(W/m^2\))
[in]	swnet	real, downward SW net (dn-up) flux ( \(W/m^2\))
[in]	lwdn	real, downward LW radiation flux ( \(W/m^2\))
[in]	sfcems	real, sfc LW emissivity (fractional)
[in]	sfcprs	real, pressure at height zlvl above ground( \(Pa\))
[in]	sfctmp	real, air temp at height zlvl above ground ( \(K\))
[in]	sfcspd	real, wind speed at height zlvl above ground ( \(m s^{-1}\))
[in]	prcp	real, precipitation rate ( \(kgm^{-2}s^{-1}\))
[in]	q2	real, mixing ratio at hght zlvl above ground ( \(kgkg^{-1}\))
[in]	q2sat	real, sat mixing ratio at zlvl above ground ( \(kgkg^{-1}\))
[in]	dqsdt2	real, slope of sat specific humidity curve at t=sfctmp ( \(kgkg^{-1}k^{-1}\))
[in]	th2	real, air potential temperature at zlvl above ground ( \(K\))
[in]	ivegsrc	integer, sfc veg type data source UMD or IGBP
[in]	vegtyp	integer, vegetation type (integer index)
[in]	soiltyp	integer, soil type (integer index)
[in]	slopetyp	integer, class of sfc slope (integer index)
[in]	shdmin	real, min areal coverage of green veg (fraction)
[in]	alb	real, background snow-free sfc albedo (fraction)
[in]	snoalb	real, max albedo over deep snow (fraction)
[in]	bexpp	real, perturbation of soil type "b" parameter (perturbation)
[in]	xlaip	real, perturbation of leave area index (perturbation)
[in]	lheatstrg	logical, flag for canopy heat storage parameterization
[in,out]	tbot	real, bottom soil temp ( \(K\)) (local yearly-mean sfc air temp)
[in,out]	cmc	real, canopy moisture content ( \(m\))
[in,out]	t1	real, ground/canopy/snowpack eff skin temp ( \(K\))
[in,out]	stc	real, soil temp ( \(K\))
[in,out]	smc	real, total soil moisture (vol fraction)
[in,out]	sh2o	real, unfrozen soil moisture (vol fraction), note: frozen part = smc-sh2o
[in,out]	sneqv	real, water-equivalent snow depth ( \(m\)), note: snow density = snwqv/snowh
[in,out]	ch	real, sfc exchange coeff for heat & moisture ( \(ms^{-1}\)), note: conductance since it's been mult by wind
[in,out]	cm	real, sfc exchange coeff for momentum ( \(ms^{-1}\)), note: conductance since it's been mult by wind
[in,out]	z0	real, roughness length ( \(m\))
[out]	nroot	integer, number of root layers
[out]	shdfac	real, aeral coverage of green veg (fraction)
[out]	snowh	real, snow depth ( \(m\))
[out]	albedo	real, sfc albedo incl snow effect (fraction)
[out]	eta	real, downward latent heat flux ( \(W/m^2\))
[out]	sheat	real, downward sensible heat flux ( \(W/m^2\))
[out]	ec	real, canopy water evaporation ( \(W/m^2\))
[out]	edir	real, direct soil evaporation ( \(W/m^2\))
[out]	et	real, plant transpiration ( \(W/m^2\))
[out]	ett	real, total plant transpiration ( \(W/m^2\))
[out]	esnow	real, sublimation from snowpack ( \(W/m^2\))
[out]	drip	real, through-fall of precip and/or dew in excess of canopy water-holding capacity ( \(m\))
[out]	dew	real, dewfall (or frostfall for t<273.15) ( \(m\))
[out]	beta	real, ratio of actual/potential evap
[out]	etp	real, potential evaporation ( \(W/m^2\))
[out]	ssoil	real, upward soil heat flux ( \(W/m^2\))
[out]	flx1	real, precip-snow sfc flux ( \(W/m^2\))
[out]	flx2	real, freezing rain latent heat flux ( \(W/m^2\))
[out]	flx3	real, phase-change heat flux from snowmelt ( \(W/m^2\))
[out]	runoff1	real, surface runoff ( \(ms^{-1}\)) not infiltrating sfc
[out]	runoff2	real, sub sfc runoff ( \(ms^{-1}\)) (baseflow)
[out]	runoff3	real, excess of porosity for a given soil layer
[out]	snomlt	real, snow melt ( \(m\)) (water equivalent)
[out]	sncovr	real, fractional snow cover
[out]	rc	real, canopy resistance (s/m)
[out]	pc	real, plant coeff (fraction) where pc*etp=transpi
[out]	rsmin	real, minimum canopy resistance (s/m)
[out]	xlai	real, leaf area index (dimensionless)
[out]	rcs	real, incoming solar rc factor (dimensionless)
[out]	rct	real, air temperature rc factor (dimensionless)
[out]	rcq	real, atoms vapor press deficit rc factor
[out]	rcsoil	real, soil moisture rc factor (dimensionless)
[out]	soilw	real, available soil moisture in root zone
[out]	soilm	real, total soil column moisture (frozen+unfrozen) ( \(m\))
[out]	smcwlt	real, wilting point (volumetric)
[out]	smcdry	real, dry soil moisture threshold (volumetric)
[out]	smcref	real, soil moisture threshold (volumetric)
[out]	smcmax	real, porosity (sat val of soil mois)

GFS Noah LSM General Algorithm

• Set ice = -1 and green vegetation fraction (shdfac) = 0 for glacial-ice land.

• Calculate soil layer depth below ground.

• For ice, set green vegetation fraction (shdfac) = 0. and set sea-ice layers of equal thickness and sum to 3 meters

• Otherwise, calculate depth (negative) below ground from top skin sfc to bottom of each soil layer.

• Call redprm() to set the land-surface paramters, including soil-type and veg-type dependent parameters.

• Calculate perturbated soil type "b" parameter. Following Gehne et al. (2019) [69] , a perturbation of LAI "leaf area index" (xlaip) and a perturbation of the empirical exponent parameter b in the soil hydraulic conductivity calculation (bexpp) are added to account for the uncertainties of LAI and b associated with different vegetation types and soil types using a linear scaling. The spatial pattern of xlaip is drawn from a normal distribution with a standard deviation of 0.25 while makes the LAI between 0 and 8. The spatial pattern of bexpp is drawn from a normal distribution with a standard deviation of 0.4, and is bounded between -1 and 1.

• Calculate perturbated leaf area index.

• Initialize precipitation logicals.

• Over sea-ice or glacial-ice, if water-equivalent snow depth (sneqv) below threshold lower bound (0.01 m for sea-ice, 0.10 m for glacial-ice), then set at lower bound and store the source increment in subsurface runoff/baseflow (runoff2).

• For sea-ice and glacial-ice cases, set smc and sh2o values = 1.0 as a flag for non-soil medium.

• If input snowpack (sneqv) is nonzero, then call csnow() to compute snow density (sndens) and snow thermal conductivity (sncond).

• Determine if it's precipitating and what kind of precipitation it is. if it's precipitating and the air temperature is colder than \(0^oC\), it's snowing! if it's precipitating and the air temperature is warmer than \(0^oC\), but the ground temperature is colder than \(0^oC\), freezing rain is presumed to be falling.

• If either precipitation flag (snowng, frzgra) is set as true:

• Since all precip is added to snowpack, no precip infiltrates into the soil so that prcp1 is set to zero.

• Call snow_new() to update snow density based on new snowfall, using old and new snow.

• Call csnow() to update snow thermal conductivity.

• If precipitation is liquid (rain), hence save in the precip variable that later can wholely or partially infiltrate the soil (along with any canopy "drip" added to this later).

• Determine snowcover fraction and albedo fraction over sea-ice, glacial-ice, and land.

• Call snfrac() to calculate snow fraction cover.

• Call alcalc() to calculate surface albedo modification due to snowdepth state.

• Calculate thermal diffusivity (df1):
  • For sea-ice case and glacial-ice case, this is constant( \(df1=2.2\)).

• For non-glacial land case, call tdfcnd() to calculate the thermal diffusivity of top soil layer ([163]).

• Add subsurface heat flux reduction effect from the overlying green canopy, adapted from section 2.1.2 of [162].

• Calculate subsurface heat flux, ssoil, from final thermal diffusivity of surface mediums,df1 above, and skin temperature and top mid-layer soil temperature.

• For uncoupled mode, call snowz0() to calculate surface roughness (z0) over snowpack using snow condition from the previous timestep.

• Calculate virtual temps and virtual potential temps needed by subroutines sfcdif and penman.

• Calculate the total downward radiation (fdown) = net solar (swnet) + downward longwave (lwdn) as input of penman() and other surface energy budget calculations.

• Call penman() to calculate potential evaporation (etp), and other partial products and sums for later calculations.

• Call canres() to calculate the canopy resistance and convert it into pc if nonzero greenness fraction.

• Now decide major pathway branch to take depending on whether snowpack exists or not:

• For no snowpack is present, call nopac() to calculate soil moisture and heat flux values and update soil moisture contant and soil heat content values.

• For a snowpack is present, call snopac().

• Noah LSM post-processing:
  • Calculate sensible heat (h) for return to parent model.

• Convert units and/or sign of total evap (eta), potential evap (etp), subsurface heat flux (s), and runoffs for what parent model expects.

• Convert the sign of soil heat flux so that:
  • ssoil>0: warm the surface (night time)
  • ssoil<0: cool the surface (day time)

• For the case of land (but not glacial-ice): convert runoff3 (internal layer runoff from supersat) from \(m\) to \(ms^-1\) and add to subsurface runoff/baseflow (runoff2). runoff2 is already a rate at this point.

• For the case of sea-ice (ice=1) or glacial-ice (ice=-1), add any snowmelt directly to surface runoff (runoff1) since there is no soil medium, and thus no call to subroutine smflx (for soil moisture tendency).

• Calculate total column soil moisture in meters (soilm) and root-zone soil moisture availability (fraction) relative to porosity/saturation.

Definition at line 116 of file sflx.f.

References alcalc().

Referenced by lsm_noah::lsm_noah_run().

Here is the call graph for this function:

Here is the caller graph for this function:

lsm_noah_run()

subroutine, public lsm_noah::lsm_noah_run	(	integer, intent(in)	im,
		integer, intent(in)	km,
		real (kind=kind_phys), intent(in)	grav,
		real (kind=kind_phys), intent(in)	cp,
		real (kind=kind_phys), intent(in)	hvap,
		real (kind=kind_phys), intent(in)	rd,
		real (kind=kind_phys), intent(in)	eps,
		real (kind=kind_phys), intent(in)	epsm1,
		real (kind=kind_phys), intent(in)	rvrdm1,
		real (kind=kind_phys), dimension(:), intent(in)	ps,
		real (kind=kind_phys), dimension(:), intent(in)	t1,
		real (kind=kind_phys), dimension(:), intent(in)	q1,
		integer, dimension(:), intent(in)	soiltyp,
		integer, dimension(:), intent(in)	vegtype,
		real (kind=kind_phys), dimension(:), intent(in)	sigmaf,
		real (kind=kind_phys), dimension(:), intent(in)	sfcemis,
		real (kind=kind_phys), dimension(:), intent(in)	dlwflx,
		real (kind=kind_phys), dimension(:), intent(in)	dswsfc,
		real (kind=kind_phys), intent(in)	delt,
		real (kind=kind_phys), dimension(:), intent(in)	tg3,
		real (kind=kind_phys), dimension(:), intent(in)	cm,
		real (kind=kind_phys), dimension(:), intent(in)	ch,
		real (kind=kind_phys), dimension(:), intent(in)	prsl1,
		real (kind=kind_phys), dimension(:), intent(in)	prslki,
		real (kind=kind_phys), dimension(:), intent(in)	zf,
		logical, dimension(:), intent(in)	land,
		real (kind=kind_phys), dimension(:), intent(in)	wind,
		integer, dimension(:), intent(in)	slopetyp,
		real (kind=kind_phys), dimension(:), intent(in)	shdmin,
		real (kind=kind_phys), dimension(:), intent(in)	shdmax,
		real (kind=kind_phys), dimension(:), intent(in)	snoalb,
		real (kind=kind_phys), dimension(:), intent(in)	sfalb,
		logical, dimension(:), intent(in)	flag_iter,
		logical, dimension(:), intent(in)	flag_guess,
		logical, intent(in)	lheatstrg,
		integer, intent(in)	isot,
		integer, intent(in)	ivegsrc,
		real (kind=kind_phys), dimension(:), intent(in)	bexppert,
		real (kind=kind_phys), dimension(:), intent(in)	xlaipert,
		real (kind=kind_phys), dimension(:), intent(in)	vegfpert,
		real (kind=kind_phys), intent(in)	pertvegf,
		real (kind=kind_phys), dimension(:), intent(in)	albdvis_lnd,
		real (kind=kind_phys), dimension(:), intent(in)	albdnir_lnd,
		real (kind=kind_phys), dimension(:), intent(in)	albivis_lnd,
		real (kind=kind_phys), dimension(:), intent(in)	albinir_lnd,
		real (kind=kind_phys), dimension(:), intent(in)	adjvisbmd,
		real (kind=kind_phys), dimension(:), intent(in)	adjnirbmd,
		real (kind=kind_phys), dimension(:), intent(in)	adjvisdfd,
		real (kind=kind_phys), dimension(:), intent(in)	adjnirdfd,
		real (kind=kind_phys), dimension(:), intent(in)	rhonewsn1,
		logical, intent(in)	exticeden,
		real (kind=kind_phys), dimension(:), intent(inout)	weasd,
		real (kind=kind_phys), dimension(:), intent(inout)	snwdph,
		real (kind=kind_phys), dimension(:), intent(inout)	tskin,
		real (kind=kind_phys), dimension(:), intent(inout)	tprcp,
		real (kind=kind_phys), dimension(:), intent(inout)	srflag,
		real (kind=kind_phys), dimension(:,:), intent(inout)	smc,
		real (kind=kind_phys), dimension(:,:), intent(inout)	stc,
		real (kind=kind_phys), dimension(:,:), intent(inout)	slc,
		real (kind=kind_phys), dimension(:), intent(inout)	canopy,
		real (kind=kind_phys), dimension(:), intent(inout)	trans,
		real (kind=kind_phys), dimension(:), intent(inout)	tsurf,
		real (kind=kind_phys), dimension(:), intent(inout)	zorl,
		real (kind=kind_phys), dimension(:), intent(inout)	sncovr1,
		real (kind=kind_phys), dimension(:), intent(inout)	qsurf,
		real (kind=kind_phys), dimension(:), intent(inout)	gflux,
		real (kind=kind_phys), dimension(:), intent(inout)	drain,
		real (kind=kind_phys), dimension(:), intent(inout)	evap,
		real (kind=kind_phys), dimension(:), intent(inout)	hflx,
		real (kind=kind_phys), dimension(:), intent(inout)	ep,
		real (kind=kind_phys), dimension(:), intent(inout)	runoff,
		real (kind=kind_phys), dimension(:), intent(inout)	cmm,
		real (kind=kind_phys), dimension(:), intent(inout)	chh,
		real (kind=kind_phys), dimension(:), intent(inout)	evbs,
		real (kind=kind_phys), dimension(:), intent(inout)	evcw,
		real (kind=kind_phys), dimension(:), intent(inout)	sbsno,
		real (kind=kind_phys), dimension(:), intent(inout)	snowc,
		real (kind=kind_phys), dimension(:), intent(inout)	stm,
		real (kind=kind_phys), dimension(:), intent(inout)	snohf,
		real (kind=kind_phys), dimension(:), intent(inout)	smcwlt2,
		real (kind=kind_phys), dimension(:), intent(inout)	smcref2,
		real (kind=kind_phys), dimension(:), intent(inout), optional	wet1,
		real (kind=kind_phys), dimension(:), intent(inout)	lai,
		real (kind=kind_phys), dimension(:), intent(inout)	rca,
		character(len=*), intent(out)	errmsg,
		integer, intent(out)	errflg
	)

• Initialize CCPP error handling variables

• Save land-related prognostic fields for guess run.

• Initialize variables wind, q, and rh at level 1.

• Prepare variables to run Noah LSM:

• Call surface_perturbation::ppfbet() to perturb vegetation fraction that goes into gfssflx().

• Apply perturbation of soil type b parameter and leave area index.

• New snow depth variables

• Call Noah LSM gfssflx().

• Noah LSM: prepare variables for return to parent model and unit conversion.

• Compute specific humidity at surface (qsurf).

• Compute surface upward sensible heat flux (hflx) and evaporation flux (evap).

• Restore land-related prognostic fields for guess run.

Definition at line 214 of file lsm_noah.f.

References sflx::gfssflx(), and surface_perturbation::ppfbet().

Here is the call graph for this function:

set_soilveg()

subroutine, public set_soilveg_mod::set_soilveg	(	integer, intent(in)	me,
		integer, intent(in)	isot,
		integer, intent(in)	ivet,
		integer, intent(in)	nlunit,
		character(len=*), intent(out)	errmsg,
		integer, intent(out)	errflg
	)

This subroutine initializes soil and vegetation.

Definition at line 16 of file set_soilveg.f.

Referenced by lsm_noah::lsm_noah_init().

Here is the caller graph for this function: