This module sets up absorption coefficients for band 10: 1390-1480 cm-1 (low - h2o; high - h2o) More...

Variables
integer, public	msa10
	msa10=65

minor gas mapping level:
integer, public	msb10
	msb10=235

integer, public	msf10
	msf10=10

integer, public	mfr10
	mfr10=4

real(kind=kind_phys), dimension(ng10, msa10), public	absa
	the array absa(NG10,65) = ka(NG10,5,13) contains absorption coefs at the NG10=6 chosen g-values for a range of pressure levels>~100mb and temperatures. the first index in the array, jt, which runs from 1 to 5, corresponds to different temperatures. more specifically, jt = 1-5 means that the data are for the corresponding temperature of tref-30, tref-15, tref, tref+15, and tref+30, respectively. the second index, jp, runs from 1 to 13 and refers to the corresponding pressure level in pref (e.g. jp = 1 is for a pressure of 1053.63 mb). the third index, ig, goes from 1 to NG10=6, and tells us which g-interval the absorption coefficients are for.

real(kind=kind_phys), dimension(ng10, msb10), public	absb
	the array absb(NG10,235) = kb(NG10,5,13:59) contains absorption coefs at the NG10=6 chosen g-values for a range of pressure levels< ~100mb and temperatures. the first index in the array, jt, which runs from 1 to 5, corresponds to different temperatures. more specifically, jt = 1-5 means that the data are for the corresponding temperature of tref-30, tref-15, tref, tref+15, and tref+30, respectively. the second index, jp, runs from 13 to 59 and refers to the jpth reference pressure level (see taumol.f for the value of these pressure levels in mb). the third index, ig, goes from 1 to NG10=6, and tells us which g-interval the absorption coefficients are for.

real(kind=kind_phys), dimension(ng10, msf10), public	selfref
	the array selfref contains the coefficient of the water vapor self-continuum (including the energy term). the first index refers to temperature in 7.2 degree increments. for instance, jt = 1 refers to a temperature of 245.6, jt = 2 refers to 252.8, etc. the second index runs over the g-channel (1 to NG10=6).

real(kind=kind_phys), dimension(ng10, mfr10), public	forref
	the array forref contains the coefficient of the water vapor foreign-continuum (including the energy term). the first index refers to reference temperature (296,260,224,260) and pressure (970,475,219,3 mbar) levels. the second index runs over the g-channel (1 to NG10=6).

real(kind=kind_phys), dimension(ng10), public	fracrefa
	planck fraction mapping level : p = 212.7250, t = 223.06 k

real(kind=kind_phys), dimension(ng10), public	fracrefb
	planck fraction mapping level : p = 95.58350 mb, t = 215.70 k

Detailed Description

This module sets up absorption coefficients for band 10: 1390-1480 cm-1 (low - h2o; high - h2o)

Variable Documentation

◆ absa

real (kind=kind_phys), dimension(ng10,msa10), public module_radlw_kgb10::absa

the array absa(NG10,65) = ka(NG10,5,13) contains absorption coefs at the NG10=6 chosen g-values for a range of pressure levels>~100mb and temperatures. the first index in the array, jt, which runs from 1 to 5, corresponds to different temperatures. more specifically, jt = 1-5 means that the data are for the corresponding temperature of tref-30, tref-15, tref, tref+15, and tref+30, respectively. the second index, jp, runs from 1 to 13 and refers to the corresponding pressure level in pref (e.g. jp = 1 is for a pressure of 1053.63 mb). the third index, ig, goes from 1 to NG10=6, and tells us which g-interval the absorption coefficients are for.

Definition at line 28262 of file radlw_datatb.f.

◆ absb

real (kind=kind_phys), dimension(ng10,msb10), public module_radlw_kgb10::absb

the array absb(NG10,235) = kb(NG10,5,13:59) contains absorption coefs at the NG10=6 chosen g-values for a range of pressure levels< ~100mb and temperatures. the first index in the array, jt, which runs from 1 to 5, corresponds to different temperatures. more specifically, jt = 1-5 means that the data are for the corresponding temperature of tref-30, tref-15, tref, tref+15, and tref+30, respectively. the second index, jp, runs from 13 to 59 and refers to the jpth reference pressure level (see taumol.f for the value of these pressure levels in mb). the third index, ig, goes from 1 to NG10=6, and tells us which g-interval the absorption coefficients are for.

Definition at line 28274 of file radlw_datatb.f.

◆ forref

real (kind=kind_phys), dimension(ng10,mfr10), public module_radlw_kgb10::forref

the array forref contains the coefficient of the water vapor foreign-continuum (including the energy term). the first index refers to reference temperature (296,260,224,260) and pressure (970,475,219,3 mbar) levels. the second index runs over the g-channel (1 to NG10=6).

Definition at line 28288 of file radlw_datatb.f.

◆ fracrefa

real (kind=kind_phys), dimension(ng10), public module_radlw_kgb10::fracrefa

planck fraction mapping level : p = 212.7250, t = 223.06 k

Definition at line 28291 of file radlw_datatb.f.

◆ fracrefb

real (kind=kind_phys), dimension(ng10), public module_radlw_kgb10::fracrefb

planck fraction mapping level : p = 95.58350 mb, t = 215.70 k

Definition at line 28294 of file radlw_datatb.f.

◆ mfr10

integer, public module_radlw_kgb10::mfr10

mfr10=4

Definition at line 28248 of file radlw_datatb.f.

◆ msa10

integer, public module_radlw_kgb10::msa10

msa10=65

Definition at line 28242 of file radlw_datatb.f.

◆ msb10

integer, public module_radlw_kgb10::msb10

msb10=235

Definition at line 28244 of file radlw_datatb.f.

◆ msf10

integer, public module_radlw_kgb10::msf10

msf10=10

Definition at line 28246 of file radlw_datatb.f.

◆ selfref

real (kind=kind_phys), dimension(ng10,msf10), public module_radlw_kgb10::selfref

the array selfref contains the coefficient of the water vapor self-continuum (including the energy term). the first index refers to temperature in 7.2 degree increments. for instance, jt = 1 refers to a temperature of 245.6, jt = 2 refers to 252.8, etc. the second index runs over the g-channel (1 to NG10=6).

Definition at line 28281 of file radlw_datatb.f.

Variables