cu_gf_driver.F90

 
 
module cu_gf_driver
 
   ! DH* TODO: replace constants with arguments to cu_gf_driver_run
   !use physcons  , g => con_g, cp => con_cp, xlv => con_hvap, r_v => con_rv
   use machine   , only: kind_phys
   use cu_gf_deep, only: cu_gf_deep_run,neg_check,fct1d3
   use cu_gf_sh  , only: cu_gf_sh_run
 
   implicit none
 
   private
 
   public :: cu_gf_driver_init, cu_gf_driver_run
 
contains
 
      subroutine cu_gf_driver_init(imfshalcnv, imfshalcnv_gf, imfdeepcnv, &
                          imfdeepcnv_gf,mpirank, mpiroot, errmsg, errflg)
 
         implicit none
 
         integer,                   intent(in) :: imfshalcnv, imfshalcnv_gf
         integer,                   intent(in) :: imfdeepcnv, imfdeepcnv_gf
         integer,                   intent(in)    :: mpirank
         integer,                   intent(in)    :: mpiroot
         character(len=*),          intent(  out) :: errmsg
         integer,                   intent(  out) :: errflg
 
         ! initialize ccpp error handling variables
         errmsg = ''
         errflg = 0
 
      end subroutine cu_gf_driver_init
 
!
! t2di is temp after advection, but before physics
! t = current temp (t2di + physics up to now)
!===================
 
      subroutine cu_gf_driver_run(ntracer,garea,im,km,dt,flag_init,flag_restart, gf_coldstart, &
               cactiv,cactiv_m,g,cp,xlv,r_v,forcet,forceqv_spechum,phil,raincv, &
               qv_spechum,t,cld1d,us,vs,t2di,w,qv2di_spechum,p2di,psuri,        &
               hbot,htop,kcnv,xland,hfx2,qfx2,aod_gf,cliw,clcw,                 &
               pbl,ud_mf,dd_mf,dt_mf,cnvw_moist,cnvc,imfshalcnv,                &
               flag_for_scnv_generic_tend,flag_for_dcnv_generic_tend,           &
               dtend,dtidx,ntqv,ntiw,ntcw,index_of_temperature,index_of_x_wind, &
               index_of_y_wind,index_of_process_scnv,index_of_process_dcnv,     &
               fhour,fh_dfi_radar,ix_dfi_radar,num_dfi_radar,cap_suppress,      &
               dfi_radar_max_intervals,ldiag3d,qci_conv,do_cap_suppress,        &
               maxupmf,maxMF,do_mynnedmf,ichoice_in,ichoicem_in,ichoice_s_in,   &
               spp_cu_deep,spp_wts_cu_deep,nchem,chem3d,fscav,wetdpc_deep,      &
               do_smoke_transport,kdt,ten_t,ten_u,ten_v,ten_q,dcliw,dclcw,errmsg,errflg)
!-------------------------------------------------------------
      implicit none
      integer, parameter :: maxiens=1
      integer, parameter :: maxens=1
      integer, parameter :: maxens2=1
      integer, parameter :: maxens3=16
      integer, parameter :: ensdim=16
      integer            :: imid_gf=1    ! gf congest conv.
      integer, parameter :: ideep=1
      integer            :: ichoice=0    ! 0 2 5 13 8
      integer            :: ichoicem=13  ! 0 2 5 13
      integer            :: ichoice_s=3  ! 0 1 2 3
      integer, intent(in) :: spp_cu_deep ! flag for using SPP perturbations
      real(kind_phys), dimension(:,:), optional, intent(in) ::        &
     &                    spp_wts_cu_deep
      real(kind=kind_phys) :: spp_wts_cu_deep_tmp
 
      logical, intent(in) :: do_cap_suppress, do_smoke_transport
      real(kind=kind_phys), parameter :: aodc0=0.14
      real(kind=kind_phys), parameter :: aodreturn=30.
      real(kind=kind_phys) :: dts,fpi,fp
      integer, parameter :: dicycle=0 ! diurnal cycle flag
      integer, parameter :: dicycle_m=0 !- diurnal cycle flag
      integer            :: ishallow_g3 ! depend on imfshalcnv
!-------------------------------------------------------------
   integer      :: its,ite, jts,jte, kts,kte
   integer, intent(in   ) :: im,km,ntracer,nchem,kdt
   integer, intent(in   ) :: ichoice_in,ichoicem_in,ichoice_s_in
   logical, intent(in   ) :: flag_init, flag_restart, do_mynnedmf, gf_coldstart
   logical, intent(in   ) :: flag_for_scnv_generic_tend,flag_for_dcnv_generic_tend
   real (kind=kind_phys), intent(in) :: g,cp,xlv,r_v
   logical, intent(in   ) :: ldiag3d
 
   real(kind=kind_phys), intent(inout), optional            :: dtend(:,:,:)
!$acc declare copy(dtend)
   integer, intent(in)                                      :: dtidx(:,:), &
        index_of_x_wind, index_of_y_wind, index_of_temperature,            &
        index_of_process_scnv, index_of_process_dcnv, ntqv, ntcw, ntiw
!$acc declare copyin(dtidx)
   real(kind=kind_phys),  dimension( : , : ), intent(in    ), optional :: forcet,forceqv_spechum
   real(kind=kind_phys),  dimension( : , : ), intent(in    ) :: w,phil
   real(kind=kind_phys),  dimension( : , : ), intent(in    ) :: t,us,vs
   real(kind=kind_phys),  dimension( : , : ), intent(inout ), optional :: qci_conv
   real(kind=kind_phys),  dimension( : , : ), intent(out   ) :: cnvw_moist,cnvc
   real(kind=kind_phys),  dimension( : , : ), intent(in    ) :: cliw, clcw
!$acc declare copyin(forcet,forceqv_spechum,w,phil)
!$acc declare copy(t,us,vs,qci_conv,cliw, clcw)
!$acc declare copyout(cnvw_moist,cnvc)
 
   real(kind=kind_phys), allocatable :: clcw_save(:,:), cliw_save(:,:)
 
   integer, intent(in) :: dfi_radar_max_intervals
   real(kind=kind_phys), intent(in) :: fhour, fh_dfi_radar(:)
   integer, intent(in) :: num_dfi_radar, ix_dfi_radar(:)
   real(kind=kind_phys), intent(in), optional :: cap_suppress(:,:)
!$acc declare copyin(fh_dfi_radar,ix_dfi_radar,cap_suppress)
 
   integer, dimension (:), intent(out) :: hbot,htop,kcnv
   integer, dimension (:), intent(in)  :: xland
   real(kind=kind_phys),    dimension (:), intent(in) :: pbl
   real(kind=kind_phys),    dimension (:), intent(in) :: maxmf
!$acc declare copyout(hbot,htop,kcnv)
!$acc declare copyin(xland,pbl)
   integer, dimension (im) :: tropics
!$acc declare create(tropics)
!  ruc variable
   real(kind=kind_phys), dimension (:),   intent(in)  :: hfx2,qfx2,psuri
   real(kind=kind_phys), dimension (:,:), intent(out) :: dd_mf,dt_mf
   real(kind=kind_phys), dimension (:,:), intent(out), optional :: ud_mf
   real(kind=kind_phys), dimension (:),   intent(out) :: raincv,cld1d
   real(kind=kind_phys), dimension (:),   intent(out), optional :: maxupmf
   real(kind=kind_phys), dimension (:,:), intent(in)  :: t2di,p2di
!$acc declare copyin(hfx2,qfx2,psuri,t2di,p2di)
!$acc declare copyout(ud_mf,dd_mf,dt_mf,raincv,cld1d)
   ! Specific humidity from FV3
   real(kind=kind_phys), dimension (:,:), intent(in) :: qv2di_spechum
   real(kind=kind_phys), dimension (:,:), intent(in) :: qv_spechum
   real(kind=kind_phys), dimension (:), intent(inout), optional :: aod_gf
!$acc declare copyin(qv2di_spechum) copy(qv_spechum,aod_gf)
   ! Local water vapor mixing ratios and cloud water mixing ratios
   real(kind=kind_phys), dimension (im,km) :: qv2di, qv, forceqv, cnvw
!$acc declare create(qv2di, qv, forceqv, cnvw)
   !
   real(kind=kind_phys), dimension(:),intent(in) :: garea
!$acc declare copyin(garea)
   real(kind=kind_phys), intent(in   ) :: dt
 
   integer, intent(in   ) :: imfshalcnv
   integer, dimension(:), intent(inout), optional :: cactiv,cactiv_m
   real(kind_phys), dimension(:), intent(in) :: fscav
!$acc declare copyin(fscav)
   real(kind_phys), dimension(:,:,:), intent(inout), optional :: chem3d
   real(kind_phys), dimension(:,:), intent(inout), optional   :: wetdpc_deep
!$acc declare copy(cactiv,cactiv_m,chem3d,wetdpc_deep)
   real(kind_phys), dimension(:,:), intent(out) :: ten_t, ten_u, ten_v, dcliw, dclcw
   real(kind_phys), dimension(:,:,:), intent(out) :: ten_q
   
   character(len=*), intent(out) :: errmsg
   integer,          intent(out) :: errflg
 
!  local variables
   integer, dimension(im) :: k22_shallow,kbcon_shallow,ktop_shallow
   real(kind=kind_phys), dimension (im)    :: rand_mom,rand_vmas
   real(kind=kind_phys), dimension (im,4)  :: rand_clos
   real(kind=kind_phys), dimension (im,km,11) :: gdc,gdc2
   real(kind=kind_phys), dimension (im)    :: ht
   real(kind=kind_phys), dimension (im)    :: ccn_gf,ccn_m
   real(kind=kind_phys) :: ccnclean
   real(kind=kind_phys), dimension (im)    :: dx
   real(kind=kind_phys), dimension (im)    :: frhm,frhd
   real(kind=kind_phys), dimension (im,km) :: outt,outq,outqc,phh,subm,cupclw,cupclws
   real(kind=kind_phys), dimension (im,km) :: dhdt,zu,zus,zd,phf,zum,zdm,outum,outvm
   real(kind=kind_phys), dimension (im,km) :: outts,outqs,outqcs,outu,outv,outus,outvs
   real(kind=kind_phys), dimension (im,km) :: outtm,outqm,outqcm,submm,cupclwm
   real(kind=kind_phys), dimension (im,km) :: cnvwt,cnvwts,cnvwtm
   real(kind=kind_phys), dimension (im,km) :: hco,hcdo,zdo,zdd,hcom,hcdom,zdom
   real(kind=kind_phys), dimension    (km) :: zh
   real(kind=kind_phys), dimension (im)    :: tau_ecmwf,edt,edtm,edtd,ter11,aa0,xlandi
   real(kind=kind_phys), dimension (im)    :: pret,prets,pretm,hexec
   real(kind=kind_phys), dimension (im,10) :: forcing,forcing2
   real(kind=kind_phys), dimension (im,nchem) :: wetdpc_mid
 
   integer, dimension (im) :: kbcon, ktop,ierr,ierrs,ierrm,kpbli
   integer, dimension (im) :: k22s,kbcons,ktops,k22,jmin,jminm
   integer, dimension (im) :: kbconm,ktopm,k22m
!$acc declare create(k22_shallow,kbcon_shallow,ktop_shallow,rand_mom,rand_vmas,        &
!$acc                rand_clos,gdc,gdc2,ht,ccn_gf,ccn_m,dx,frhm,frhd,wetdpc_mid, &
!$acc                outt,outq,outqc,phh,subm,cupclw,cupclws, &
!$acc                dhdt,zu,zus,zd,phf,zum,zdm,outum,outvm,   &
!$acc                outts,outqs,outqcs,outu,outv,outus,outvs, &
!$acc                outtm,outqm,outqcm,submm,cupclwm,         &
!$acc                cnvwt,cnvwts,cnvwtm,hco,hcdo,zdo,zdd,hcom,hcdom,zdom, &
!$acc                tau_ecmwf,edt,edtm,edtd,ter11,aa0,xlandi, &
!$acc                pret,prets,pretm,hexec,forcing,forcing2,wetdpc_mid,  &
!$acc                kbcon, ktop,ierr,ierrs,ierrm,kpbli, &
!$acc                k22s,kbcons,ktops,k22,jmin,jminm,kbconm,ktopm,k22m)
 
   integer :: iens,ibeg,iend,jbeg,jend,n
   integer :: ibegh,iendh,jbegh,jendh
   integer :: ibegc,iendc,jbegc,jendc,kstop
   real(kind=kind_phys), dimension(im,km) :: rho_dryar
!$acc declare create(rho_dryar)
   real(kind=kind_phys) :: pten,pqen,paph,zrho,pahfs,pqhfl,zkhvfl,pgeoh
   integer, parameter :: ipn = 0
 
!
! basic environmental input includes moisture convergence (mconv)
! omega (omeg), windspeed (us,vs), and a flag (ierr) to turn off
! convection for this call only and at that particular gridpoint
!
   real(kind=kind_phys), dimension (im,km) :: qcheck,zo,t2d,q2d,po,p2d,rhoi,clw_ten,new_qv_spechum,new_cliw,new_clcw
   real(kind=kind_phys), dimension (im,km) :: tn,qo,tshall,qshall,dz8w,omeg
   real(kind=kind_phys), dimension (im)    :: z1,psur,cuten,cutens,cutenm
   real(kind=kind_phys), dimension (im)    :: umean,vmean,pmean,mc_thresh
   real(kind=kind_phys), dimension (im)    :: xmbs,xmbs2,xmb,xmbm,xmb_dumm,mconv
!$acc declare create(qcheck,zo,t2d,q2d,po,p2d,rhoi,clw_ten,tn,qo,tshall,qshall,dz8w,omeg, &
!$acc                z1,psur,cuten,cutens,cutenm,umean,vmean,pmean,mc_thresh,           &
!$acc                xmbs,xmbs2,xmb,xmbm,xmb_dumm,mconv)
 
   integer :: i,j,k,icldck,ipr,jpr,jpr_deep,ipr_deep,uidx,vidx,tidx,qidx
   integer :: itf,jtf,ktf,iss,jss,nbegin,nend,cliw_idx,clcw_idx
   integer :: high_resolution
   real(kind=kind_phys)    :: clwtot,clwtot1,excess,tcrit,tscl_kf,dp,dq,sub_spread,subcenter
   real(kind=kind_phys)    :: dsubclw,dsubclws,dsubclwm,dtime_max,ztm,ztq,hfm,qfm,rkbcon,rktop
   real(kind=kind_phys), dimension(km)   :: massflx,trcflx_in1,clw_in1,po_cup
!  real(kind=kind_phys), dimension(km)   :: trcflx_in2,clw_in2,clw_ten2
   real(kind=kind_phys), dimension (im)  :: flux_tun,tun_rad_mid,tun_rad_shall,tun_rad_deep
!$acc declare create(flux_tun,tun_rad_mid,tun_rad_shall,tun_rad_deep)
   character*50 :: ierrc(im),ierrcm(im)
   character*50 :: ierrcs(im)
!  ruc variable
!  hfx2 -- sensible heat flux (k m/s), positive upward from sfc
!  qfx2 -- latent heat flux (kg/kg m/s), positive upward from sfc
!  gf needs them in w/m2. define hfx and qfx after simple unit conversion
   real(kind=kind_phys), dimension (im)  :: hfx,qfx
!$acc declare create(hfx,qfx)
   real(kind=kind_phys) tem,tem1,tf,tcr,tcrf,psum
   real(kind=kind_phys) :: cliw_shal,clcw_shal,tem_shal, cliw_both, weight_sum
   real(kind=kind_phys) :: cliw_deep,clcw_deep,tem_deep, clcw_both
   integer :: cliw_deep_idx, clcw_deep_idx, cliw_shal_idx, clcw_shal_idx
 
   real(kind=kind_phys) :: cap_suppress_j(im)
!$acc declare create(cap_suppress_j)
   integer :: itime, do_cap_suppress_here
   logical :: exit_func
 
  !parameter (tf=243.16, tcr=270.16, tcrf=1.0/(tcr-tf)) ! FV3 original
  !parameter (tf=263.16, tcr=273.16, tcrf=1.0/(tcr-tf))
  !parameter (tf=233.16, tcr=263.16, tcrf=1.0/(tcr-tf))
  parameter(tf=258.16, tcr=273.16, tcrf=1.0/(tcr-tf)) ! as fim, HCB tuning
  ! initialize ccpp error handling variables
     errmsg = ''
     errflg = 0
     
     ten_t = 0.0
     ten_u = 0.0
     ten_v = 0.0
     ten_q = 0.0
     dcliw = 0.0
     dclcw = 0.0
     new_clcw = clcw
     new_cliw = cliw
     
     ichoice   = ichoice_in
     ichoicem  = ichoicem_in
     ichoice_s = ichoice_s_in
     if(do_cap_suppress) then
!$acc serial
       do itime=1,num_dfi_radar
         if(ix_dfi_radar(itime)<1) cycle
         if(fhour<fh_dfi_radar(itime)) cycle
         if(fhour>=fh_dfi_radar(itime+1)) cycle
         exit
       enddo
!$acc end serial
     endif
     if(do_cap_suppress .and. itime<=num_dfi_radar) then
        do_cap_suppress_here = 1
!$acc kernels
        cap_suppress_j(:) = cap_suppress(:,itime)
!$acc end kernels
     else
        do_cap_suppress_here = 0
!$acc kernels
        cap_suppress_j(:) = 0
!$acc end kernels
     endif
 
     if(ldiag3d) then
       if(flag_for_dcnv_generic_tend) then
         cliw_deep_idx=0
         clcw_deep_idx=0
       else
         cliw_deep_idx=dtidx(100+ntiw,index_of_process_dcnv)
         clcw_deep_idx=dtidx(100+ntcw,index_of_process_dcnv)
       endif
       if(flag_for_scnv_generic_tend) then
         cliw_shal_idx=0
         clcw_shal_idx=0
       else
         cliw_shal_idx=dtidx(100+ntiw,index_of_process_scnv)
         clcw_shal_idx=dtidx(100+ntcw,index_of_process_scnv)
       endif
       if(cliw_deep_idx>=1 .or. clcw_deep_idx>=1 .or. &
            cliw_shal_idx>=1 .or.  clcw_shal_idx>=1) then
         allocate(clcw_save(im,km), cliw_save(im,km))
!$acc enter data create(clcw_save,cliw_save)
!$acc kernels
         clcw_save(:,:)=clcw(:,:)
         cliw_save(:,:)=cliw(:,:)
!$acc end kernels
       endif
     endif
 
!
! Scale specific humidity to dry mixing ratio
!
!$acc kernels
     ! state in before physics
     qv2di = qv2di_spechum/(1.0_kind_phys-qv2di_spechum)
     ! forcing by dynamics, based on state in
     forceqv = forceqv_spechum/(1.0_kind_phys-qv2di_spechum)
     ! current state (updated by preceeding physics)
     qv = qv_spechum/(1.0_kind_phys-qv_spechum)
!
!
! these should be coming in from outside
!
!    cactiv(:)      = 0
     if (spp_cu_deep == 0) then
       rand_mom(:)    = 0.
       rand_vmas(:)   = 0.
       rand_clos(:,:) = 0.
     else 
       do i=1,im
         spp_wts_cu_deep_tmp=min(max(-1.0_kind_phys, spp_wts_cu_deep(i,1)),1.0_kind_phys)
         rand_mom(i)    = spp_wts_cu_deep_tmp 
         rand_vmas(i)   = spp_wts_cu_deep_tmp 
         rand_clos(i,:) = spp_wts_cu_deep_tmp
       end do
     end if
!$acc end kernels
!
     its=1
     ite=im
     itf=ite
     jts=1
     jte=1
     jtf=jte
     kts=1
     kte=km
     ktf=kte-1
!$acc kernels
! 
     tropics(:)=0
!
!
     tun_rad_shall(:)=.01
     tun_rad_mid(:)=.3 !.02
     tun_rad_deep(:)=.3 !.065
     edt(:)=0.
     edtm(:)=0.
     edtd(:)=0.
     zdd(:,:)=0.
     flux_tun(:)=5.
! dx for scale awareness
!$acc end kernels
 
     if (imfshalcnv == 3) then
      ishallow_g3 = 1
     else
      ishallow_g3 = 0
     end if
     high_resolution=0
     subcenter=0.
     iens=1
!
! these can be set for debugging
!
     ipr=0
     jpr=0
     ipr_deep=0
     jpr_deep= 0 !53322 ! 528196 !0 ! 1136 !0 !421755 !3536
!
!
     ibeg=its
     iend=ite
     tcrit=258.
 
     ztm=0.
     ztq=0.
     hfm=0.
     qfm=0.
!$acc kernels
     ud_mf(:,:) =0.
     dd_mf(:,:) =0.
     dt_mf(:,:) =0.
     tau_ecmwf(:)=0.
!$acc end kernels
!
     j=1
!$acc kernels
     ht(:)=phil(:,1)/g
!$acc loop private(zh)
     do i=its,ite
      cld1d(i)=0.
      zo(i,:)=phil(i,:)/g
      dz8w(i,1)=zo(i,2)-zo(i,1)
      zh(1)=0.
      kpbli(i)=2
      do k=kts+1,ktf
       dz8w(i,k)=zo(i,k+1)-zo(i,k)
      enddo
!$acc loop seq
      do k=kts+1,ktf
       zh(k)=zh(k-1)+dz8w(i,k-1)
       if(zh(k).gt.pbl(i))then
        kpbli(i)=max(2,k)
        exit
       endif
      enddo
     enddo
!$acc end kernels
 
!$acc kernels
     do i= its,itf
      forcing(i,:)=0.
      forcing2(i,:)=0.
      ccn_gf(i) = 0.
      ccn_m(i) = 0.
 
      ! set aod and ccn
      if ((flag_init .and. .not.flag_restart) .or. gf_coldstart) then
        aod_gf(i)=aodc0
      else
        if((cactiv(i).eq.0) .and. (cactiv_m(i).eq.0))then
          if(aodc0>aod_gf(i)) aod_gf(i)=aod_gf(i)+((aodc0-aod_gf(i))*(dt/(aodreturn*60)))
          if(aod_gf(i)>aodc0) aod_gf(i)=aodc0
        endif
      endif
 
      ccn_gf(i)=max(5., (aod_gf(i)/0.0027)**(1/0.640))
      ccn_m(i)=ccn_gf(i)
 
      ccnclean=max(5., (aodc0/0.0027)**(1/0.640))
 
      hbot(i)  =kte
      htop(i)  =kts
      raincv(i)=0.
      xlandi(i)=real(xland(i))
!     if(abs(xlandi(i)-1.).le.1.e-3) tun_rad_shall(i)=.15
!     if(abs(xlandi(i)-1.).le.1.e-3) flux_tun(i)=1.5
     enddo
     do i= its,itf
      mconv(i)=0.
     enddo
     do k=kts,kte
      do i= its,itf
       omeg(i,k)=0.
       zu(i,k)=0.
       zum(i,k)=0.
       zus(i,k)=0.
       zd(i,k)=0.
       zdm(i,k)=0.
      enddo
     enddo
 
     psur(:)=0.01*psuri(:)
     do i=its,itf
      ter11(i)=max(0.,ht(i))
     enddo
     do k=kts,kte
      do i=its,ite
       cnvw(i,k)=0.
       cnvc(i,k)=0.
       gdc(i,k,1)=0.
       gdc(i,k,2)=0.
       gdc(i,k,3)=0.
       gdc(i,k,4)=0.
       gdc(i,k,7)=0.
       gdc(i,k,8)=0.
       gdc(i,k,9)=0.
       gdc(i,k,10)=0.
       gdc2(i,k,1)=0.
      enddo
     enddo
     ierr(:)=0
     ierrm(:)=0
     ierrs(:)=0
     cuten(:)=0.
     cutenm(:)=0.
     cutens(:)=0.
!$acc end kernels
     ierrc(:)=" "
!$acc kernels
     
 
     kbcon(:)=0
     kbcons(:)=0
     kbconm(:)=0
 
     ktop(:)=0
     ktops(:)=0
     ktopm(:)=0
 
     xmb(:)=0.
     xmb_dumm(:)=0.
     xmbm(:)=0.
     xmbs(:)=0.
     xmbs2(:)=0.
 
     k22s(:)=0
     k22m(:)=0
     k22(:)=0
 
     jmin(:)=0
     jminm(:)=0
 
     pret(:)=0.
     prets(:)=0.
     pretm(:)=0.
 
     umean(:)=0.
     vmean(:)=0.
     pmean(:)=0.
 
     cupclw(:,:)=0.
     cupclwm(:,:)=0.
     cupclws(:,:)=0.
 
     cnvwt(:,:)=0.
     cnvwts(:,:)=0.
     cnvwtm(:,:)=0.
 
     hco(:,:)=0.
     hcom(:,:)=0.
     hcdo(:,:)=0.
     hcdom(:,:)=0.
 
     outt(:,:)=0.
     outts(:,:)=0.
     outtm(:,:)=0.
 
     outu(:,:)=0.
     outus(:,:)=0.
     outum(:,:)=0.
 
     outv(:,:)=0.
     outvs(:,:)=0.
     outvm(:,:)=0.
 
     outq(:,:)=0.
     outqs(:,:)=0.
     outqm(:,:)=0.
 
     outqc(:,:)=0.
     outqcs(:,:)=0.
     outqcm(:,:)=0.
 
     subm(:,:)=0.
     dhdt(:,:)=0.
 
     frhm(:)=0.
     frhd(:)=0.
 
     do k=kts,ktf
      do i=its,itf
        p2d(i,k)=0.01*p2di(i,k)
        po(i,k)=p2d(i,k) !*.01
        rhoi(i,k) = 100.*p2d(i,k)/(287.04*(t2di(i,k)*(1.+0.608*qv2di(i,k))))
        qcheck(i,k)=qv(i,k)
        tn(i,k)=t(i,k)!+forcet(i,k)*dt
        qo(i,k)=max(1.e-16,qv(i,k))!+forceqv(i,k)*dt
        t2d(i,k)=t2di(i,k)-forcet(i,k)*dt
        q2d(i,k)=max(1.e-16,qv2di(i,k)-forceqv(i,k)*dt)
        if(qo(i,k).lt.1.e-16)qo(i,k)=1.e-16
        tshall(i,k)=t2d(i,k)
        qshall(i,k)=q2d(i,k)
      enddo
     enddo
!$acc end kernels
123  format(1x,i2,1x,2(1x,f8.0),1x,2(1x,f8.3),3(1x,e13.5))
!$acc kernels
     do i=its,itf
      do k=kts,kpbli(i)
         tshall(i,k)=t(i,k)
         qshall(i,k)=max(1.e-16,qv(i,k))
      enddo
     enddo
!
! converting hfx2 and qfx2 to w/m2
!    hfx=cp*rho*hfx2
!    qfx=xlv*qfx2
     do i=its,itf
      hfx(i)=hfx2(i)*cp*rhoi(i,1)
      qfx(i)=qfx2(i)*xlv*rhoi(i,1)
      dx(i) = sqrt(garea(i))
      mc_thresh(i)=3.25/dx(i)
     enddo
 
     do i=its,itf
      do k=kts,kpbli(i)
       tn(i,k)=t(i,k)
       qo(i,k)=max(1.e-16,qv(i,k))
      enddo
     enddo
     nbegin=0
     nend=0
     do i=its,itf
      do k=kts,kpbli(i)
       dhdt(i,k)=cp*(forcet(i,k)+(t(i,k)-t2di(i,k))/dt) +  &
                 xlv*(forceqv(i,k)+(qv(i,k)-qv2di(i,k))/dt)
!      tshall(i,k)=t(i,k)
!      qshall(i,k)=qv(i,k)
      enddo
     enddo
!$acc loop collapse(2) independent private(dp)
     do k=  kts+1,ktf-1
      do i = its,itf
       if((p2d(i,1)-p2d(i,k)).gt.150.and.p2d(i,k).gt.300)then
         dp=-.5*(p2d(i,k+1)-p2d(i,k-1))
!$acc atomic
         umean(i)=umean(i)+us(i,k)*dp
!$acc atomic
         vmean(i)=vmean(i)+vs(i,k)*dp
!$acc atomic
         pmean(i)=pmean(i)+dp
       endif
      enddo
     enddo
     do i = its,itf
       psum=0.
       do k=kts,ktf-3
        if (clcw(i,k) .gt. -999.0 .and. clcw(i,k+1) .gt. -999.0 )then
           dp=(p2d(i,k)-p2d(i,k+1))
           psum=psum+dp
           clwtot = cliw(i,k) + clcw(i,k)
           if(clwtot.lt.1.e-32)clwtot=0.
           forcing(i,7)=forcing(i,7)+clwtot*dp
        endif
       enddo
       if(psum.gt.0)forcing(i,7)=forcing(i,7)/psum
       forcing2(i,7)=forcing(i,7)
     enddo
     do k=kts,ktf-1
      do i = its,itf
        omeg(i,k)= w(i,k) !-g*rhoi(i,k)*w(i,k)
      enddo
     enddo
     do i = its,itf
      if(mconv(i).lt.0.)mconv(i)=0.
      if((dx(i)<6500.).and.do_mynnedmf.and.(maxmf(i).gt.0.))ierr(i)=555
     enddo
!$acc end kernels
     if (dx(its)<6500.) then
       imid_gf=0
     endif
!
!---- call cumulus parameterization
!
       if(ishallow_g3.eq.1)then
 
!$acc kernels
          do i=its,ite
           ierrs(i)=0
           ierrm(i)=0
          enddo
!$acc end kernels
!
!
          call cu_gf_sh_run (us,vs,                                              &
! input variables, must be supplied
                         zo,t2d,q2d,ter11,tshall,qshall,p2d,psur,dhdt,kpbli,     &
                         rhoi,hfx,qfx,xlandi,ichoice_s,tcrit,dt,                 &
! input variables. ierr should be initialized to zero or larger than zero for
! turning off shallow convection for grid points
                         zus,xmbs,kbcons,ktops,k22s,ierrs,ierrcs,                &
! output tendencies
                         outts,outqs,outqcs,outus,outvs,cnvwt,prets,cupclws,     &
! dimesnional variables
                         itf,ktf,its,ite, kts,kte,ipr,tropics)
 
!$acc kernels
          do i=its,itf
           if(xmbs(i).gt.0.)then
            cutens(i)=1.
            if (dx(i)<6500.) then
             ierrm(i)=555
             ierr(i)=555
            endif
           endif
          enddo
!$acc end kernels
          call neg_check('shallow',ipn,dt,qcheck,outqs,outts,outus,outvs,   &
                                 outqcs,prets,its,ite,kts,kte,itf,ktf,ktops)
       endif
 
       ipr=0
       jpr_deep=0 !340765
      if(imid_gf == 1)then
       call cu_gf_deep_run(        &
               itf,ktf,its,ite, kts,kte  &
              ,dicycle_m     &
              ,ichoicem      &
              ,ipr           &
              ,ccn_m         &
              ,ccnclean      &
              ,dt            &
              ,imid_gf       &
              ,kpbli         &
              ,dhdt          &
              ,xlandi        &
              ,zo            &
              ,forcing       &
              ,t2d           &
              ,q2d           &
              ,ter11         &
              ,tshall        &
              ,qshall        &
              ,p2d           &
              ,psur          &
              ,us            &
              ,vs            &
              ,rhoi          &
              ,hfx           &
              ,qfx           &
              ,dx            &
              ,mconv         &
              ,omeg          &
              ,cactiv_m      &
              ,cnvwtm        &
              ,zum           &
              ,zdm           & ! hli
              ,zdd           &
              ,edtm          &
              ,edtd          & ! hli
              ,xmbm          &
              ,xmb_dumm      &
              ,xmbs          &
              ,pretm         &
              ,outum         &
              ,outvm         &
              ,outtm         &
              ,outqm         &
              ,outqcm        &
              ,kbconm        &
              ,ktopm         &
              ,cupclwm       &
              ,frhm          &
              ,ierrm         &
              ,ierrcm        &
              ,nchem         &
              ,fscav         &
              ,chem3d        &
              ,wetdpc_mid    &
              ,do_smoke_transport   &
!    the following should be set to zero if not available
              ,rand_mom      & ! for stochastics mom, if temporal and spatial patterns exist
              ,rand_vmas     & ! for stochastics vertmass, if temporal and spatial patterns exist
              ,rand_clos     & ! for stochastics closures, if temporal and spatial patterns exist
              ,spp_cu_deep   & ! flag to what you want perturbed
                               ! 1 = momentum transport
                               ! 2 = normalized vertical mass flux profile
                               ! 3 = closures
                               ! more is possible, talk to developer or
                               ! implement yourself. pattern is expected to be
                               ! betwee -1 and +1
              ,do_cap_suppress_here,cap_suppress_j &
              ,k22m          &
              ,jminm,kdt,mc_thresh)
!$acc kernels
            do i=its,itf
             do k=kts,ktf
              qcheck(i,k)=qv(i,k) +outqs(i,k)*dt
             enddo
            enddo
!$acc end kernels
      call neg_check('mid',ipn,dt,qcheck,outqm,outtm,outum,outvm,   &
                     outqcm,pretm,its,ite,kts,kte,itf,ktf,ktopm)
     endif
     if(ideep.eq.1)then
      call cu_gf_deep_run(        &
               itf,ktf,its,ite, kts,kte  &
 
              ,dicycle       &
              ,ichoice       &
              ,ipr           &
              ,ccn_gf        &
              ,ccnclean      &
              ,dt            &
              ,0             &
 
              ,kpbli         &
              ,dhdt          &
              ,xlandi        &
 
              ,zo            &
              ,forcing2      &
              ,t2d           &
              ,q2d           &
              ,ter11         &
              ,tn            &
              ,qo            &
              ,p2d           &
              ,psur          &
              ,us            &
              ,vs            &
              ,rhoi          &
              ,hfx           &
              ,qfx           &
              ,dx            &
              ,mconv         &
              ,omeg          &
              ,cactiv        &
              ,cnvwt         &
              ,zu            &
              ,zd            &
              ,zdm           & ! hli
              ,edt           &
              ,edtm          & ! hli
              ,xmb           &
              ,xmbm          &
              ,xmbs          &
              ,pret          &
              ,outu          &
              ,outv          &
              ,outt          &
              ,outq          &
              ,outqc         &
              ,kbcon         &
              ,ktop          &
              ,cupclw        &
              ,frhd          &
              ,ierr          &
              ,ierrc         &
              ,nchem         &
              ,fscav         &
              ,chem3d        &
              ,wetdpc_deep   &
              ,do_smoke_transport     &
!    the following should be set to zero if not available
              ,rand_mom      & ! for stochastics mom, if temporal and spatial patterns exist
              ,rand_vmas     & ! for stochastics vertmass, if temporal and spatial patterns exist
              ,rand_clos     & ! for stochastics closures, if temporal and spatial patterns exist
              ,spp_cu_deep   & ! flag to what you want perturbed
                               ! 1 = momentum transport
                               ! 2 = normalized vertical mass flux profile
                               ! 3 = closures
                               ! more is possible, talk to developer or
                               ! implement yourself. pattern is expected to be
                               ! betwee -1 and +1
              ,do_cap_suppress_here,cap_suppress_j &
              ,k22          &
              ,jmin,kdt,mc_thresh)
          jpr=0
          ipr=0
!$acc kernels
          do i=its,itf
           do k=kts,ktf
            qcheck(i,k)=qv(i,k) +(outqs(i,k)+outqm(i,k))*dt
           enddo
          enddo
!$acc end kernels
       call neg_check('deep',ipn,dt,qcheck,outq,outt,outu,outv,   &
                      outqc,pret,its,ite,kts,kte,itf,ktf,ktop)
!
      endif
!$acc kernels
            do i=its,itf
              kcnv(i)=0
              if(pretm(i).gt.0.)then
                 kcnv(i)= 1 !jmin(i)
                 cutenm(i)=1.
              else
                 kbconm(i)=0
                 ktopm(i)=0
                 cutenm(i)=0.
              endif   ! pret > 0
 
              maxupmf(i)=0.
              if(forcing2(i,6).gt.0.)then
                maxupmf(i)=maxval(xmb(i)*zu(i,kts:ktf)/forcing2(i,6))
              endif
              if (xland(i)==0)then ! cu precip rate (mm/h)
                 if((maxupmf(i).lt.0.1) .or. (pret(i)*3600.lt.0.05)) pret(i)=0.
              endif
              if(pret(i).gt.0.)then
                 cuten(i)=1.
                 cutenm(i)=0.
                 pretm(i)=0.
                 kcnv(i)= 1 !jmin(i)
                 ktopm(i)=0
                 kbconm(i)=0
              else
                 kbcon(i)=0
                 ktop(i)=0
                 cuten(i)=0.
              endif   ! pret > 0
            enddo
!$acc end kernels
!
!$acc parallel loop private(kstop,dtime_max,massflx,trcflx_in1,clw_in1,po_cup)
            do i=its,itf
            massflx(:)=0.
            trcflx_in1(:)=0.
            clw_in1(:)=0.
            do k=kts,ktf
              clw_ten(i, k)=0.
            enddo
            po_cup(:)=0.
            kstop=kts
            if(ktopm(i).gt.kts .or. ktop(i).gt.kts)kstop=max(ktopm(i),ktop(i))
            if(ktops(i).gt.kts)kstop=max(kstop,ktops(i))
            if(kstop.gt.2)then
            htop(i)=kstop
            if(kbcon(i).gt.2 .or. kbconm(i).gt.2)then
               hbot(i)=max(kbconm(i),kbcon(i)) !jmin(i)
            endif
 
            dtime_max=dt
            forcing2(i,3)=0.
            do k=kts,kstop
               cnvc(i,k) = 0.04 * log(1. + 675. * zu(i,k) * xmb(i)) +   &
                           0.04 * log(1. + 675. * zum(i,k) * xmbm(i)) + &
                           0.04 * log(1. + 675. * zus(i,k) * xmbs(i))
               cnvc(i,k) = min(cnvc(i,k), 0.6)
               cnvc(i,k) = max(cnvc(i,k), 0.0)
               cnvw(i,k)=cnvwt(i,k)*xmb(i)*dt+cnvwts(i,k)*xmbs(i)*dt+cnvwtm(i,k)*xmbm(i)*dt
               ud_mf(i,k)=cuten(i)*zu(i,k)*xmb(i)*dt
               dd_mf(i,k)=cuten(i)*zd(i,k)*edt(i)*xmb(i)*dt
               
               ten_t(i,k) = (cutens(i)*outts(i,k)+cutenm(i)*outtm(i,k)+outt(i,k)*cuten(i))
               qv(i,k)=max(1.e-16,qv(i,k)+dt*(cutens(i)*outqs(i,k)+cutenm(i)*outqm(i,k)+outq(i,k)*cuten(i)))
               gdc(i,k,7)=sqrt(us(i,k)**2 +vs(i,k)**2)
               ten_u(i,k) = outu(i,k)*cuten(i) +outum(i,k)*cutenm(i) +outus(i,k)*cutens(i)
               ten_v(i,k) = outv(i,k)*cuten(i) +outvm(i,k)*cutenm(i) +outvs(i,k)*cutens(i)
 
               gdc(i,k,1)= max(0.,tun_rad_shall(i)*cupclws(i,k)*cutens(i))      ! my mod
               !gdc2(i,k,1)=max(0.,tun_rad_deep(i)*(cupclwm(i,k)*cutenm(i)+cupclw(i,k)*cuten(i)))
               gdc2(i,k,1)=max(0.,tun_rad_mid(i)*cupclwm(i,k)*cutenm(i)+frhd(i)*cupclw(i,k)*cuten(i)+tun_rad_shall(i)*cupclws(i,k)*cutens(i))
               !gdc2(i,k,1) = min(0.1, max(0.01, tun_rad_mid(i)*frhm(i)))*cupclwm(i,k)*cutenm(i) + min(0.1, max(0.01, tun_rad_deep(i)*(frhd(i))))*cupclw(i,k)*cuten(i) + tun_rad_shall(i)*cupclws(i,k)*cutens(i)
               qci_conv(i,k)=gdc2(i,k,1)
               gdc(i,k,2)=(outt(i,k))*86400.
               gdc(i,k,3)=(outtm(i,k))*86400.
               gdc(i,k,4)=(outts(i,k))*86400.
               gdc(i,k,7)=-(gdc(i,k,7)-sqrt(us(i,k)**2 +vs(i,k)**2))/dt
              !gdc(i,k,8)=(outq(i,k))*86400.*xlv/cp
               gdc(i,k,8)=(outqm(i,k)+outqs(i,k)+outq(i,k))*86400.*xlv/cp
               gdc(i,k,9)=gdc(i,k,2)+gdc(i,k,3)+gdc(i,k,4)
 
               dp=100.*(p2d(i,k)-p2d(i,k+1))
               dtime_max=min(dtime_max,.5*dp)
               po_cup(k)=.5*(p2d(i,k)+p2d(i,k+1))
               if (clcw(i,k) .gt. -999.0 .and. clcw(i,k+1) .gt. -999.0 )then
                  clwtot = cliw(i,k) + clcw(i,k)
                  if(clwtot.lt.1.e-32)clwtot=0.
                  clwtot1= cliw(i,k+1) + clcw(i,k+1)
                  if(clwtot1.lt.1.e-32)clwtot1=0.
                  clw_in1(k)=clwtot
                  massflx(k)=-(xmb(i) *( zu(i,k)- edt(i)* zd(i,k)))   &
                             -(xmbm(i)*(zdm(i,k)-edtm(i)*zdm(i,k)))   &
                             -(xmbs(i)*zus(i,k))
                  trcflx_in1(k)=massflx(k)*.5*(clwtot+clwtot1)
                  forcing2(i,3)=forcing2(i,3)+clwtot
               endif
             enddo
 
             massflx(1)=0.
             trcflx_in1(1)=0.
             call fct1d3 (kstop,kte,dtime_max,po_cup,                  &
                            clw_in1,massflx,trcflx_in1,clw_ten(i,:),g)
 
             do k=1,kstop
               tem  = dt*(outqcs(i,k)*cutens(i)+outqc(i,k)*cuten(i)    &
                      +outqcm(i,k)*cutenm(i)                           &
                      +clw_ten(i,k)                                    &
                         )
               tem1 = max(0.0, min(1.0, (tcr-t(i,k))*tcrf))
               if (clcw(i,k) .gt. -999.0) then
                new_cliw(i,k) = max(0.,cliw(i,k) + tem * tem1)            ! ice
                new_clcw(i,k) = max(0.,clcw(i,k) + tem *(1.0-tem1))       ! water
                dcliw(i,k) = (new_cliw(i,k) - cliw(i,k))/dt
                dclcw(i,k) = (new_clcw(i,k) - clcw(i,k))/dt
               else
                new_cliw(i,k) = max(0.,cliw(i,k) + tem)
                dcliw(i,k) = (new_cliw(i,k) - cliw(i,k))/dt
               endif
               
             enddo
 
            gdc(i,1,10)=forcing(i,1)
            gdc(i,2,10)=forcing(i,2)
            gdc(i,3,10)=forcing(i,3)
            gdc(i,4,10)=forcing(i,4)
            gdc(i,5,10)=forcing(i,5)
            gdc(i,6,10)=forcing(i,6)
            gdc(i,7,10)=forcing(i,7)
            gdc(i,8,10)=forcing(i,8)
            gdc(i,10,10)=xmb(i)
            gdc(i,11,10)=xmbm(i)
            gdc(i,12,10)=xmbs(i)
            gdc(i,13,10)=hfx(i)
            gdc(i,15,10)=qfx(i)
            gdc(i,16,10)=pret(i)*3600.
 
 
            if(ktop(i).gt.2 .and.pret(i).gt.0.)dt_mf(i,ktop(i)-1)=ud_mf(i,ktop(i))
            endif
            enddo
!$acc end parallel
!$acc kernels
            do i=its,itf
              if(pret(i).gt.0.)then
                 cactiv(i)=1
                 raincv(i)=.001*(cutenm(i)*pretm(i)+cutens(i)*prets(i)+cuten(i)*pret(i))*dt
              else
                 cactiv(i)=0
                 if(pretm(i).gt.0)raincv(i)=.001*cutenm(i)*pretm(i)*dt
              endif   ! pret > 0
 
              if(pretm(i).gt.0)then
                 cactiv_m(i)=1
              else
                 cactiv_m(i)=0
              endif
 
              ! Unify ccn
              if(ccn_m(i).lt.ccn_gf(i))then
                ccn_gf(i)=ccn_m(i)
              endif
 
              if(ccn_gf(i)<0) ccn_gf(i)=0
 
              ! Convert ccn back to aod
              aod_gf(i)=0.0027*(ccn_gf(i)**0.64)
              if(aod_gf(i)<0.007)then
                aod_gf(i)=0.007
                ccn_gf(i)=(aod_gf(i)/0.0027)**(1/0.640)
              elseif(aod_gf(i)>aodc0)then
                aod_gf(i)=aodc0
                ccn_gf(i)=(aod_gf(i)/0.0027)**(1/0.640)
              endif
            enddo
!$acc end kernels
 100    continue
!
! Scale dry mixing ratios for water wapor and cloud water to specific humidy / moist mixing ratios
!
!$acc kernels
        new_qv_spechum = qv/(1.0_kind_phys+qv)
        cnvw_moist = cnvw/(1.0_kind_phys+qv)
!$acc end kernels
        do i=its,ite
          do k=kts,kte
            ten_q(i,k,ntqv) = (new_qv_spechum(i,k) - qv_spechum(i,k))/dt
          end do
        end do
!
! Diagnostic tendency updates
!
        if(ldiag3d) then
          if(ishallow_g3.eq.1 .and. .not.flag_for_scnv_generic_tend) then
            uidx=dtidx(index_of_x_wind,index_of_process_scnv)
            vidx=dtidx(index_of_y_wind,index_of_process_scnv)
            tidx=dtidx(index_of_temperature,index_of_process_scnv)
            qidx=dtidx(100+ntqv,index_of_process_scnv)
            if(uidx>=1) then
!$acc kernels
              do k=kts,ktf
                dtend(:,k,uidx) = dtend(:,k,uidx) + cutens(:)*outus(:,k) * dt
              enddo
!$acc end kernels
            endif
            if(vidx>=1) then
!$acc kernels
              do k=kts,ktf
                dtend(:,k,vidx) = dtend(:,k,vidx) + cutens(:)*outvs(:,k) * dt
              enddo
!$acc end kernels
            endif
            if(tidx>=1) then
!$acc kernels
              do k=kts,ktf
                dtend(:,k,tidx) = dtend(:,k,tidx) + cutens(:)*outts(:,k) * dt
              enddo
!$acc end kernels
            endif
            if(qidx>=1) then
!$acc kernels
              do k=kts,ktf
                do i=its,itf
                  tem = cutens(i)*outqs(i,k)* dt
                  tem = tem/(1.0_kind_phys+tem)
                  dtend(i,k,qidx) = dtend(i,k,qidx) + tem
                enddo
              enddo
!$acc end kernels
            endif
          endif
          if((ideep.eq.1. .or. imid_gf.eq.1) .and. .not.flag_for_dcnv_generic_tend) then
            uidx=dtidx(index_of_x_wind,index_of_process_dcnv)
            vidx=dtidx(index_of_y_wind,index_of_process_dcnv)
            tidx=dtidx(index_of_temperature,index_of_process_dcnv)
            if(uidx>=1) then
!$acc kernels
              do k=kts,ktf
                dtend(:,k,uidx) = dtend(:,k,uidx) + (cuten*outu(:,k)+cutenm*outum(:,k)) * dt
              enddo
!$acc end kernels
            endif
            if(vidx>=1) then
!$acc kernels
              do k=kts,ktf
                dtend(:,k,vidx) = dtend(:,k,vidx) + (cuten*outv(:,k)+cutenm*outvm(:,k)) * dt
              enddo
!$acc end kernels
            endif
            if(tidx>=1) then
!$acc kernels
              do k=kts,ktf
                dtend(:,k,tidx) = dtend(:,k,tidx) + (cuten*outt(:,k)+cutenm*outtm(:,k)) * dt
              enddo
!$acc end kernels
            endif
 
            qidx=dtidx(100+ntqv,index_of_process_dcnv)
            if(qidx>=1) then
!$acc kernels
              do k=kts,ktf
                do i=its,itf
                  tem = (cuten(i)*outq(i,k) + cutenm(i)*outqm(i,k))* dt
                  tem = tem/(1.0_kind_phys+tem)
                  dtend(i,k,qidx) = dtend(i,k,qidx) + tem
                enddo
              enddo
!$acc end kernels
            endif
          endif
          if(allocated(clcw_save)) then
!$acc parallel loop collapse(2) private(tem_shal,tem_deep,tem,tem1,weight_sum,cliw_both,clcw_both)
            do k=kts,ktf
              do i=its,itf
                tem_shal = dt*(outqcs(i,k)*cutens(i)+outqcm(i,k)*cutenm(i))
                tem_deep = dt*(outqc(i,k)*cuten(i)+clw_ten(i,k))
                tem  = tem_shal+tem_deep
                tem1 = max(0.0, min(1.0, (tcr-t(i,k))*tcrf))
                weight_sum = abs(tem_shal)+abs(tem_deep)
                if(weight_sum<1e-12) then
                  cycle
                endif
 
                if (clcw_save(i,k) .gt. -999.0) then
                  cliw_both = max(0.,cliw_save(i,k) + tem * tem1) - cliw_save(i,k)
                  clcw_both = max(0.,clcw_save(i,k) + tem) - clcw_save(i,k)
                else if(cliw_idx>=1) then
                  cliw_both = max(0.,cliw_save(i,k) + tem) - cliw_save(i,k)
                  clcw_both = 0
                endif
                if(cliw_deep_idx>=1) then
                  dtend(i,k,cliw_deep_idx) = dtend(i,k,cliw_deep_idx) + abs(tem_deep)/weight_sum*cliw_both
                endif
                if(clcw_deep_idx>=1) then
                  dtend(i,k,clcw_deep_idx) = dtend(i,k,clcw_deep_idx) + abs(tem_deep)/weight_sum*clcw_both
                endif
                if(cliw_shal_idx>=1) then
                  dtend(i,k,cliw_shal_idx) = dtend(i,k,cliw_shal_idx) + abs(tem_shal)/weight_sum*cliw_both
                endif
                if(clcw_shal_idx>=1) then
                  dtend(i,k,clcw_shal_idx) = dtend(i,k,clcw_shal_idx) + abs(tem_shal)/weight_sum*clcw_both
                endif
              enddo
            enddo
!$acc end parallel
          endif
        endif
   end subroutine cu_gf_driver_run
end module cu_gf_driver