This is Grell-Freitas deep convection scheme module. More...

Collaboration diagram for Grell-Freitas Deep Convection Module:

Functions/Subroutines
integer function	cu_gf_deep::my_maxloc1d (a, n)

subroutine	cu_gf_deep::cu_gf_deep_run (itf, ktf, its, ite, kts, kte, dicycle, ichoice, ipr, ccn, ccnclean, dtime, imid, kpbl, dhdt, xland, zo, forcing, t, q, z1, tn, qo, po, psur, us, vs, rho, hfx, qfx, dx, mconv, omeg, csum, cnvwt, zuo, zdo, zdm, edto, edtm, xmb_out, xmbm_in, xmbs_in, pre, outu, outv, outt, outq, outqc, kbcon, ktop, cupclw, frh_out, ierr, ierrc, nchem, fscav, chem3d, wetdpc_deep, do_smoke_transport, rand_mom, rand_vmas, rand_clos, nranflag, do_capsuppress, cap_suppress_j, k22, jmin, kdt, mc_thresh)
	Driver for the deep or congestus GF routine.

subroutine	cu_gf_deep::fct1d3 (ktop, n, dt, z, tracr, massflx, trflx_in, dellac, g)
	Calculates tracer fluxes due to subsidence, only up-stream differencing is currently used but flux corrected transport can be turn on.

subroutine	cu_gf_deep::rain_evap_below_cloudbase (itf, ktf, its, ite, kts, kte, ierr, kbcon, xmb, psur, xland, qo_cup, po_cup, qes_cup, pwavo, edto, pwevo, pre, outt, outq)
	Calculates rain evaporation below cloud base.

subroutine	cu_gf_deep::cup_dd_edt (ierr, us, vs, z, ktop, kbcon, edt, p, pwav, pw, ccn, ccnclean, pwev, edtmax, edtmin, edtc, psum2, psumh, rho, aeroevap, pefc, xland1, itf, ktf, its, ite, kts, kte)
	Calculates strength of downdraft based on windshear and/or aerosol content.

subroutine	cu_gf_deep::cup_dd_moisture (ierrc, zd, hcd, hes_cup, qcd, qes_cup, pwd, q_cup, z_cup, dd_massentr, dd_massdetr, jmin, ierr, gamma_cup, pwev, bu, qrcd, p_cup, q, he, iloop, itf, ktf, its, ite, kts, kte)
	Calcultes moisture properties of downdrafts.

subroutine	cu_gf_deep::cup_env (z, qes, he, hes, t, q, p, z1, psur, ierr, tcrit, itest, itf, ktf, its, ite, kts, kte)
	Calculates environmental moist static energy, saturation moist static energy, heights, and saturation mixing ratio.

subroutine	cu_gf_deep::cup_env_clev (t, qes, q, he, hes, z, p, qes_cup, q_cup, he_cup, hes_cup, z_cup, p_cup, gamma_cup, t_cup, psur, ierr, z1, itf, ktf, its, ite, kts, kte)
	Calculates environmental values on cloud levels.

subroutine	cu_gf_deep::cup_forcing_ens_3d (closure_n, xland, aa0, aa1, xaa0, mbdt, dtime, ierr, ierr2, ierr3, xf_ens, axx, forcing, maxens3, mconv, rand_clos, p_cup, ktop, omeg, zd, zdm, k22, zu, pr_ens, edt, edtm, kbcon, ichoice, imid, ipr, itf, ktf, its, ite, kts, kte, dicycle, tau_ecmwf, aa1_bl, xf_dicycle)
	Calculates an ensemble of closures and the resulting ensemble average to determine cloud base mass-flux.

subroutine	cu_gf_deep::cup_kbcon (ierrc, cap_inc, iloop_in, k22, kbcon, he_cup, hes_cup, hkb, ierr, kbmax, p_cup, cap_max, ztexec, zqexec, jprnt, itf, ktf, its, ite, kts, kte, z_cup, entr_rate, heo, imid)
	Calculates the level of convective cloud base.

subroutine	cu_gf_deep::cup_maximi (array, ks, ke, maxx, ierr, itf, ktf, its, ite, kts, kte)
	Calculates the level at which the maximum value in an array occurs.

subroutine	cu_gf_deep::cup_minimi (array, ks, kend, kt, ierr, itf, ktf, its, ite, kts, kte)
	Calculates the level at which the minimum value in an array occurs.

subroutine	cu_gf_deep::cup_up_aa0 (aa0, z, zu, dby, gamma_cup, t_cup, kbcon, ktop, ierr, itf, ktf, its, ite, kts, kte)
	Calculates the cloud work functions for updrafts.

subroutine	cu_gf_deep::neg_check (name, j, dt, q, outq, outt, outu, outv, outqc, pret, its, ite, kts, kte, itf, ktf, ktop)
	Checks for negative or excessive tendencies and corrects in a mass conversing way by adjusting the cloud base mass-flux.

subroutine	cu_gf_deep::cup_output_ens_3d (xff_mid, xf_ens, ierr, dellat, dellaq, dellaqc, outtem, outq, outqc, dx, zu, pre, pw, xmb, ktop, edt, pwd, name, ierr2, ierr3, p_cup, pr_ens, maxens3, sig, closure_n, xland1, xmbm_in, xmbs_in, rrfs_factor, ichoice, imid, ipr, itf, ktf, its, ite, kts, kte, dicycle, xf_dicycle)
	This subroutine calculates final output fields including physical tendencies, precipitation, and mass-flux.

subroutine	cu_gf_deep::cup_up_moisture (name, ierr, z_cup, qc, qrc, pw, pwav, p_cup, kbcon, ktop, dby, clw_all, xland1, q, gamma_cup, zu, qes_cup, k22, qe_cup, c0, c0t3d, zqexec, ccn, ccnclean, rho, c1d, t, autoconv, up_massentr, up_massdetr, psum, psumh, itest, itf, ktf, its, ite, kts, kte)
	Calculates moisture properties of the updraft.

real function	cu_gf_deep::satvap (temp2)
	Calculates saturation vapor pressure.

subroutine	cu_gf_deep::get_cloud_bc (mzp, array, x_aver, k22, add)
	Calculates the average value of a variable at the updraft originating level.

subroutine	cu_gf_deep::rates_up_pdf (rand_vmas, ipr, name, ktop, ierr, p_cup, entr_rate_2d, hkbo, heo, heso_cup, z_cup, xland, kstabi, k22, kbcon, its, ite, itf, kts, kte, ktf, zuo, kpbl, ktopdby, csum, pmin_lev)
	Driver for the normalized mass-flux routine.

subroutine	cu_gf_deep::get_zu_zd_pdf_fim (kklev, p, rand_vmas, zubeg, ipr, xland, zuh2, draft, ierr, kb, kt, zu, kts, kte, ktf, max_mass, kpbli, csum, pmin_lev)
	Calculates a normalized mass-flux profile for updrafts and downdrafts using the beta function.

subroutine	cu_gf_deep::cup_up_aa1bl (aa0, t, tn, q, qo, dtime, z_cup, zu, dby, gamma_cup, t_cup, kbcon, ktop, ierr, itf, ktf, its, ite, kts, kte)
	Calculates the cloud work function based on boundary layer forcing.

subroutine	cu_gf_deep::get_inversion_layers (ierr, p_cup, t_cup, z_cup, qo_cup, qeso_cup, k_inv_layers, kstart, kend, dtempdz, itf, ktf, its, ite, kts, kte)
	Finds temperature inversions using the first and second derivative of temperature.

subroutine	cu_gf_deep::get_lateral_massflux (itf, ktf, its, ite, kts, kte, ierr, ktop, zo_cup, zuo, cd, entr_rate_2d, up_massentro, up_massdetro, up_massentr, up_massdetr, draft, kbcon, k22, up_massentru, up_massdetru, lambau)
	Calculates mass entranment and detrainment rates.

subroutine	cu_gf_deep::get_partition_liq_ice (ierr, tn, po_cup, p_liq_ice, melting_layer, itf, ktf, its, ite, kts, kte, cumulus)
	Calculates the partition between cloud water and cloud ice.

subroutine	cu_gf_deep::get_melting_profile (ierr, tn_cup, po_cup, p_liq_ice, melting_layer, qrco, pwo, edto, pwdo, melting, itf, ktf, its, ite, kts, kte, cumulus)
	Calculates the melting profile.

subroutine	cu_gf_deep::get_cloud_top (name, ktop, ierr, p_cup, entr_rate_2d, hkbo, heo, heso_cup, z_cup, kstabi, k22, kbcon, its, ite, itf, kts, kte, ktf, zuo, kpbl, klcl, hcot)
	Calculates the cloud top height.

Detailed Description

This is Grell-Freitas deep convection scheme module.

Function/Subroutine Documentation

◆ cu_gf_deep_run()

subroutine cu_gf_deep::cu_gf_deep_run	(	integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte,
		integer, intent(in)	dicycle,
		integer, intent(in)	ichoice,
		integer, intent(in)	ipr,
		real(kind=kind_phys), dimension (its:ite), intent(inout)	ccn,
		real(kind=kind_phys), intent(in)	ccnclean,
		real(kind=kind_phys), intent(in)	dtime,
		integer, intent(in)	imid,
		integer, dimension (its:ite), intent(in)	kpbl,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	dhdt,
		real(kind=kind_phys), dimension (its:ite), intent(in)	xland,
		real(kind=kind_phys), dimension (its:ite,kts:kte)	zo,
		real(kind=kind_phys), dimension(its:ite,10), intent(inout)	forcing,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	t,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	q,
		real(kind=kind_phys), dimension (its:ite), intent(in)	z1,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	tn,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	qo,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	po,
		real(kind=kind_phys), dimension (its:ite), intent(in)	psur,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	us,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	vs,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	rho,
		real(kind=kind_phys), dimension (its:ite), intent(in)	hfx,
		real(kind=kind_phys), dimension (its:ite), intent(in)	qfx,
		real(kind=kind_phys), dimension (its:ite), intent(in)	dx,
		real(kind=kind_phys), dimension (its:ite), intent(inout)	mconv,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	omeg,
		integer, dimension (its:ite), intent(in), optional	csum,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	cnvwt,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	zuo,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	zdo,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	zdm,
		real(kind=kind_phys), dimension (its:ite)	edto,
		real(kind=kind_phys), dimension (its:ite)	edtm,
		real(kind=kind_phys), dimension (its:ite), intent(inout)	xmb_out,
		real(kind=kind_phys), dimension (its:ite), intent(in)	xmbm_in,
		real(kind=kind_phys), dimension (its:ite), intent(in)	xmbs_in,
		real(kind=kind_phys), dimension (its:ite), intent(inout)	pre,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	outu,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	outv,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	outt,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	outq,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	outqc,
		integer, dimension (its:ite), intent(inout)	kbcon,
		integer, dimension (its:ite), intent(inout)	ktop,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	cupclw,
		real(kind=kind_phys), dimension (its:ite), intent(out)	frh_out,
		integer, dimension (its:ite), intent(inout)	ierr,
		character*50, dimension(its:ite)	ierrc,
		integer, intent(in)	nchem,
		real(kind=kind_phys), dimension(:), intent(in)	fscav,
		real(kind=kind_phys), dimension (:,:,:), intent(inout), optional	chem3d,
		real(kind=kind_phys), dimension (:,:), intent(out), optional	wetdpc_deep,
		logical, intent(in)	do_smoke_transport,
		real(kind=kind_phys), dimension (its:ite), intent(in)	rand_mom,
		real(kind=kind_phys), dimension (its:ite), intent(in)	rand_vmas,
		real(kind=kind_phys), dimension (its:ite,4), intent(in)	rand_clos,
		integer, intent(in)	nranflag,
		integer, intent(in)	do_capsuppress,
		real(kind=kind_phys), dimension(:), intent(in), optional	cap_suppress_j,
		integer, dimension (its:ite)	k22,
		integer, dimension (its:ite)	jmin,
		integer, intent(in)	kdt,
		real(kind=kind_phys), dimension (its:ite), intent(in)	mc_thresh
	)

Driver for the deep or congestus GF routine.

Grell-Freitas Deep Convection General Algorithm

Call cup_env() to calculate moist static energy, heights, qes

Call cup_env_clev() to calculate environmental values on cloud levels

Call get_partition_liq_ice() to calculate partition between liq/ice cloud contents

Compute the level where detrainment for downdraft starts (kdet)

Determine level with highest moist static energy content (k22)

call get_cloud_bc() and cup_kbcon() to determine the level of convective cloud base (kbcon)

Call cup_minimi() to increase detrainment in stable layers

Call get_cloud_bc() to initial conditions for updraft

Call get_inversion_layer() to get inversion layers for mid level cloud tops

Call rates_up_pdf() to get normalized mass flux, entrainment and detrainmentrates for updraft

Call get_lateral_massflux() to calculate mass entrainment and detrainment

Call cup_minimi() to calculate downdraft originating level (jmin)

Call cup_up_moisture() to calculate moisture properties of updraft

Compute downdraft moist static energy + moisture budget

Call cup_dd_moisture() to calculate moisture properties of downdraft

Call cup_up_aa0() to calculate workfunctions for updrafts

Call cup_env() to calculate moist static energy, heights, qes, ... only by bl tendencies

Call cup_env_clev() to calculate environmental values on cloud levels only by bl tendencies

Call cup_up_aa1bl() to calculate ECMWF version diurnal cycle closure

Call cup_ip_aa0() to calculate workfunctions for updrafts

Call cup_dd_edt() to determine downdraft strength in terms of windshear

Call get_melting_profile() to get melting profile

Call cup_env() to calculate moist static energy, heights, qes

Call cup_env_clev() to calculate environmental values on cloud levels

Call cup_up_aa0() to calculate workfunctions for updraft

Call cup_forcing_ens_3d() to calculate cloud base mass flux

Call rain_evap_below_cloudbase() to calculate evaporation below cloud base

atmospheric composition tracers

Determine whether to perform aerosol transport

Store aerosol concentrations if present

Since kinetic energy is being dissipated, add heating accordingly (from ecmwf)

Definition at line 78 of file cu_gf_deep.F90.

Referenced by cu_gf_driver::cu_gf_driver_run().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ cup_dd_edt()

subroutine cu_gf_deep::cup_dd_edt	(	integer, dimension (its:ite), intent(inout)	ierr,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	us,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	vs,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	z,
		integer, dimension (its:ite), intent(in)	ktop,
		integer, dimension (its:ite), intent(in)	kbcon,
		real(kind=kind_phys), dimension (its:ite), intent(out)	edt,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	p,
		real(kind=kind_phys), dimension (its:ite), intent(in)	pwav,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	pw,
		real(kind=kind_phys), dimension (its:ite), intent(inout)	ccn,
		real(kind=kind_phys), intent(in)	ccnclean,
		real(kind=kind_phys), dimension (its:ite), intent(in)	pwev,
		real(kind=kind_phys), dimension (its:ite), intent(in)	edtmax,
		real(kind=kind_phys), dimension (its:ite), intent(in)	edtmin,
		real(kind=kind_phys), dimension (its:ite,1), intent(out)	edtc,
		real(kind=kind_phys), dimension (its:ite), intent(in)	psum2,
		real(kind=kind_phys), dimension (its:ite), intent(in)	psumh,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	rho,
		integer, intent(in)	aeroevap,
		real(kind=kind_phys), dimension (its:ite), intent(out)	pefc,
		integer, dimension (its:ite), intent(in)	xland1,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte
	)

Calculates strength of downdraft based on windshear and/or aerosol content.

Definition at line 2634 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run().

Here is the caller graph for this function:

◆ cup_dd_moisture()

subroutine cu_gf_deep::cup_dd_moisture	(	character*50, dimension(its:ite)	ierrc,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	zd,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	hcd,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	hes_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	qcd,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	qes_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	pwd,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	q_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	z_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	dd_massentr,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	dd_massdetr,
		integer, dimension (its:ite), intent(in)	jmin,
		integer, dimension (its:ite), intent(inout)	ierr,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	gamma_cup,
		real(kind=kind_phys), dimension (its:ite), intent(out)	pwev,
		real(kind=kind_phys), dimension (its:ite), intent(out)	bu,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	qrcd,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	p_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	q,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	he,
		integer, intent(in)	iloop,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte
	)

Calcultes moisture properties of downdrafts.

Definition at line 2779 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run().

Here is the caller graph for this function:

◆ cup_env()

subroutine cu_gf_deep::cup_env	(	real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	z,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	qes,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	he,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	hes,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	t,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	q,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	p,
		real(kind=kind_phys), dimension (its:ite), intent(in)	z1,
		real(kind=kind_phys), dimension (its:ite), intent(in)	psur,
		integer, dimension (its:ite), intent(inout)	ierr,
		real(kind=kind_phys)	tcrit,
		integer, intent(in)	itest,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte
	)

Calculates environmental moist static energy, saturation moist static energy, heights, and saturation mixing ratio.

Definition at line 2936 of file cu_gf_deep.F90.

References cu_gf_deep::satvap().

Referenced by cu_gf_deep::cu_gf_deep_run(), and cu_gf_sh::cu_gf_sh_run().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ cup_env_clev()

subroutine cu_gf_deep::cup_env_clev	(	real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	t,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	qes,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	q,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	he,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	hes,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	z,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	p,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	qes_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	q_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	he_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	hes_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	z_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	p_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	gamma_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	t_cup,
		real(kind=kind_phys), dimension (its:ite), intent(in)	psur,
		integer, dimension (its:ite), intent(inout)	ierr,
		real(kind=kind_phys), dimension (its:ite), intent(in)	z1,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte
	)

Calculates environmental values on cloud levels.

Parameters

t	environmental temperature
qes	environmental saturation mixing ratio
q	environmental mixing ratio
he	environmental moist static energy
hes	environmental saturation moist static energy
z	environmental heights
p	environmental pressure
qes_cup	environmental saturation mixing ratio on cloud levels
q_cup	environmental mixing ratio on cloud levels
he_cup	environmental moist static energy on cloud levels
hes_cup	environmental saturation moist static energy on cloud levels
z_cup	environmental heights on cloud levels
p_cup	environmental pressure on cloud levels
gamma_cup	gamma on cloud levels
t_cup	environmental temperature on cloud levels
psur	surface pressure
ierr	error value, maybe modified in this routine
z1	terrain elevation
itf,ktf,its,ite,kts,kte	horizontal and vertical dimension

Definition at line 3090 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run(), and cu_gf_sh::cu_gf_sh_run().

Here is the caller graph for this function:

◆ cup_forcing_ens_3d()

subroutine cu_gf_deep::cup_forcing_ens_3d	(	real(kind=kind_phys), dimension (its:ite), intent(inout)	closure_n,
		integer, dimension (its:ite), intent(in)	xland,
		real(kind=kind_phys), dimension (its:ite), intent(inout)	aa0,
		real(kind=kind_phys), dimension (its:ite), intent(in)	aa1,
		real(kind=kind_phys), dimension (its:ite,1), intent(in)	xaa0,
		real(kind=kind_phys), intent(in)	mbdt,
		real(kind=kind_phys), intent(in)	dtime,
		integer, dimension (its:ite), intent(inout)	ierr,
		integer, dimension (its:ite), intent(inout)	ierr2,
		integer, dimension (its:ite), intent(inout)	ierr3,
		real(kind=kind_phys), dimension (its:ite,1:maxens3), intent(inout)	xf_ens,
		real(kind=kind_phys), dimension (its:ite), intent(in)	axx,
		real(kind=kind_phys), dimension (its:ite,10), intent(inout)	forcing,
		integer, intent(in)	maxens3,
		real(kind=kind_phys), dimension (its:ite), intent(in)	mconv,
		real(kind=kind_phys), dimension (its:ite,4), intent(in)	rand_clos,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	p_cup,
		integer, dimension (its:ite), intent(inout)	ktop,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	omeg,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	zd,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	zdm,
		integer, dimension (its:ite), intent(inout)	k22,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	zu,
		real(kind=kind_phys), dimension (its:ite,1:maxens3), intent(inout)	pr_ens,
		real(kind=kind_phys), dimension (its:ite), intent(in)	edt,
		real(kind=kind_phys), dimension (its:ite), intent(in)	edtm,
		integer, dimension (its:ite), intent(inout)	kbcon,
		integer, intent(in)	ichoice,
		integer, intent(in)	imid,
		integer, intent(in)	ipr,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte,
		integer, intent(in)	dicycle,
		real(kind=kind_phys), dimension (its:ite), intent(in)	tau_ecmwf,
		real(kind=kind_phys), dimension (its:ite), intent(in)	aa1_bl,
		real(kind=kind_phys), dimension (its:ite), intent(inout)	xf_dicycle
	)

Calculates an ensemble of closures and the resulting ensemble average to determine cloud base mass-flux.

Definition at line 3177 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run().

Here is the caller graph for this function:

◆ cup_kbcon()

subroutine cu_gf_deep::cup_kbcon	(	character*50, dimension(its:ite)	ierrc,
		real(kind=kind_phys), dimension (its:ite), intent(in)	cap_inc,
		integer, intent(in)	iloop_in,
		integer, dimension (its:ite), intent(inout)	k22,
		integer, dimension (its:ite), intent(inout)	kbcon,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	he_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	hes_cup,
		real(kind=kind_phys), dimension (its:ite), intent(inout)	hkb,
		integer, dimension (its:ite), intent(inout)	ierr,
		integer, dimension (its:ite), intent(in)	kbmax,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	p_cup,
		real(kind=kind_phys), dimension (its:ite), intent(in)	cap_max,
		real(kind=kind_phys), dimension (its:ite), intent(in)	ztexec,
		real(kind=kind_phys), dimension (its:ite), intent(in)	zqexec,
		integer, intent(in)	jprnt,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	z_cup,
		real(kind=kind_phys), dimension (its:ite), intent(in)	entr_rate,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	heo,
		integer, intent(in)	imid
	)

Calculates the level of convective cloud base.

Definition at line 3579 of file cu_gf_deep.F90.

References cu_gf_deep::get_cloud_bc().

Referenced by cu_gf_deep::cu_gf_deep_run(), and cu_gf_sh::cu_gf_sh_run().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ cup_maximi()

subroutine cu_gf_deep::cup_maximi	(	real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	array,
		integer, intent(in)	ks,
		integer, dimension (its:ite), intent(in)	ke,
		integer, dimension (its:ite), intent(out)	maxx,
		integer, dimension (its:ite), intent(in)	ierr,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte
	)

Calculates the level at which the maximum value in an array occurs.

Definition at line 3738 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run().

Here is the caller graph for this function:

◆ cup_minimi()

subroutine cu_gf_deep::cup_minimi	(	real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	array,
		integer, dimension (its:ite), intent(in)	ks,
		integer, dimension (its:ite), intent(in)	kend,
		integer, dimension (its:ite), intent(out)	kt,
		integer, dimension (its:ite), intent(in)	ierr,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte
	)

Calculates the level at which the minimum value in an array occurs.

Definition at line 3801 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run(), and cu_gf_sh::cu_gf_sh_run().

Here is the caller graph for this function:

◆ cup_output_ens_3d()

subroutine cu_gf_deep::cup_output_ens_3d	(	real(kind=kind_phys), dimension (its:ite,2), intent(in)	xff_mid,
		real(kind=kind_phys), dimension (its:ite,1:maxens3), intent(inout)	xf_ens,
		integer, dimension (its:ite), intent(inout)	ierr,
		real(kind=kind_phys), dimension (its:ite,kts:kte,1), intent(in)	dellat,
		real(kind=kind_phys), dimension (its:ite,kts:kte,1), intent(in)	dellaq,
		real(kind=kind_phys), dimension (its:ite,kts:kte,1), intent(in)	dellaqc,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	outtem,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	outq,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	outqc,
		real(kind=kind_phys), dimension (its:ite), intent(in)	dx,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	zu,
		real(kind=kind_phys), dimension (its:ite), intent(inout)	pre,
		real(kind=kind_phys), dimension (its:ite,kts:kte,1), intent(in)	pw,
		real(kind=kind_phys), dimension (its:ite), intent(inout)	xmb,
		integer, dimension (its:ite), intent(in)	ktop,
		real(kind=kind_phys), dimension (its:ite), intent(in)	edt,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	pwd,
		character (), intent(in)	name,
		integer, dimension (its:ite), intent(inout)	ierr2,
		integer, dimension (its:ite), intent(inout)	ierr3,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	p_cup,
		real(kind=kind_phys), dimension (its:ite,1:maxens3), intent(inout)	pr_ens,
		integer, intent(in)	maxens3,
		real(kind=kind_phys), dimension (its:ite), intent(in)	sig,
		real(kind=kind_phys), dimension (its:ite), intent(inout)	closure_n,
		integer, dimension (its:ite), intent(in)	xland1,
		real(kind=kind_phys), dimension (its:ite), intent(in)	xmbm_in,
		real(kind=kind_phys), dimension (its:ite), intent(in)	xmbs_in,
		real(kind=kind_phys), dimension (its:ite), intent(in)	rrfs_factor,
		integer, intent(in)	ichoice,
		integer, intent(in)	imid,
		integer, intent(in)	ipr,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte,
		integer, intent(in)	dicycle,
		real(kind=kind_phys), dimension (its:ite), intent(in)	xf_dicycle
	)

This subroutine calculates final output fields including physical tendencies, precipitation, and mass-flux.

Definition at line 4054 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run().

Here is the caller graph for this function:

◆ cup_up_aa0()

subroutine cu_gf_deep::cup_up_aa0	(	real(kind=kind_phys), dimension (its:ite), intent(out)	aa0,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	z,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	zu,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	dby,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	gamma_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	t_cup,
		integer, dimension (its:ite), intent(in)	kbcon,
		integer, dimension (its:ite), intent(in)	ktop,
		integer, dimension (its:ite), intent(inout)	ierr,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte
	)

Calculates the cloud work functions for updrafts.

Definition at line 3859 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run(), and cu_gf_sh::cu_gf_sh_run().

Here is the caller graph for this function:

◆ cup_up_aa1bl()

subroutine cu_gf_deep::cup_up_aa1bl	(	real(kind=kind_phys), dimension (its:ite), intent(out)	aa0,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	t,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	tn,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	q,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	qo,
		real(kind=kind_phys), intent(in)	dtime,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	z_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	zu,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	dby,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	gamma_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	t_cup,
		integer, dimension (its:ite), intent(in)	kbcon,
		integer, dimension (its:ite), intent(in)	ktop,
		integer, dimension (its:ite), intent(inout)	ierr,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte
	)

Calculates the cloud work function based on boundary layer forcing.

Definition at line 5091 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run().

Here is the caller graph for this function:

◆ cup_up_moisture()

subroutine cu_gf_deep::cup_up_moisture	(	character (), intent(in)	name,
		integer, dimension (its:ite), intent(inout)	ierr,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	z_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	qc,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	qrc,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	pw,
		real(kind=kind_phys), dimension (its:ite), intent(out)	pwav,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	p_cup,
		integer, dimension (its:ite), intent(in)	kbcon,
		integer, dimension (its:ite), intent(in)	ktop,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	dby,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	clw_all,
		integer, dimension (its:ite), intent(in)	xland1,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	q,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	gamma_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	zu,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	qes_cup,
		integer, dimension (its:ite), intent(in)	k22,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	qe_cup,
		real(kind=kind_phys), dimension (its:ite), intent(in)	c0,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	c0t3d,
		real(kind=kind_phys), dimension (its:ite), intent(in)	zqexec,
		real(kind=kind_phys), dimension (its:ite), intent(in)	ccn,
		real(kind=kind_phys), intent(in)	ccnclean,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	rho,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	c1d,
		real(kind=kind_phys), dimension (its:ite,kts:kte)	t,
		integer, intent(in)	autoconv,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	up_massentr,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	up_massdetr,
		real(kind=kind_phys), dimension (its:ite), intent(out)	psum,
		real(kind=kind_phys), dimension (its:ite), intent(out)	psumh,
		integer, intent(in)	itest,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte
	)

Calculates moisture properties of the updraft.

Definition at line 4271 of file cu_gf_deep.F90.

References cu_gf_deep::get_cloud_bc().

Referenced by cu_gf_deep::cu_gf_deep_run().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ fct1d3()

subroutine cu_gf_deep::fct1d3	(	integer, intent(in)	ktop,
		integer, intent(in)	n,
		real(kind=kind_phys), intent(in)	dt,
		real(kind=kind_phys), dimension(n+0), intent(in)	z,
		real(kind=kind_phys), dimension(n), intent(in)	tracr,
		real(kind=kind_phys), dimension(n+0), intent(in)	massflx,
		real(kind=kind_phys), dimension(n+0), intent(in)	trflx_in,
		real(kind=kind_phys), dimension(n+0), intent(out)	dellac,
		real(kind=kind_phys), intent(in)	g
	)

Calculates tracer fluxes due to subsidence, only up-stream differencing is currently used but flux corrected transport can be turn on.

Definition at line 2359 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run(), and cu_gf_driver::cu_gf_driver_run().

Here is the caller graph for this function:

◆ get_cloud_bc()

subroutine cu_gf_deep::get_cloud_bc	(	integer, intent(in)	mzp,
		real(kind=kind_phys), dimension(:), intent(in)	array,
		real(kind=kind_phys), intent(out)	x_aver,
		integer, intent(in)	k22,
		real(kind=kind_phys), intent(in)	add
	)

Calculates the average value of a variable at the updraft originating level.

Definition at line 4675 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run(), cu_gf_sh::cu_gf_sh_run(), cu_gf_deep::cup_kbcon(), and cu_gf_deep::cup_up_moisture().

Here is the caller graph for this function:

◆ get_cloud_top()

subroutine cu_gf_deep::get_cloud_top	(	character (), intent(in)	name,
		integer, dimension (its:ite), intent(inout)	ktop,
		integer, dimension (its:ite), intent(inout)	ierr,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	p_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	entr_rate_2d,
		real(kind=kind_phys), dimension (its:ite), intent(in)	hkbo,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	heo,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	heso_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	z_cup,
		integer, dimension (its:ite), intent(in)	kstabi,
		integer, dimension (its:ite), intent(in)	k22,
		integer, dimension (its:ite), intent(in)	kbcon,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	itf,
		integer, intent(in)	kts,
		integer, intent(in)	kte,
		integer, intent(in)	ktf,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	zuo,
		integer, dimension (its:ite), intent(in)	kpbl,
		integer, dimension (its:ite), intent(in)	klcl,
		real(kind=kind_phys), dimension (its:ite,kts:kte)	hcot
	)

Calculates the cloud top height.

Definition at line 5670 of file cu_gf_deep.F90.

◆ get_inversion_layers()

subroutine cu_gf_deep::get_inversion_layers	(	integer, dimension (its:ite), intent(in)	ierr,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	p_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	t_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	z_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	qo_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	qeso_cup,
		integer, dimension (its:ite,kts:kte), intent(out)	k_inv_layers,
		integer, dimension (its:ite), intent(in)	kstart,
		integer, dimension (its:ite), intent(in)	kend,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(out)	dtempdz,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte
	)

Finds temperature inversions using the first and second derivative of temperature.

Definition at line 5161 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run(), and cu_gf_sh::cu_gf_sh_run().

Here is the caller graph for this function:

◆ get_lateral_massflux()

subroutine cu_gf_deep::get_lateral_massflux	(	integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte,
		integer, dimension(its:ite), intent(in)	ierr,
		integer, dimension(its:ite), intent(in)	ktop,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	zo_cup,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	zuo,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(inout)	cd,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(inout)	entr_rate_2d,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(out)	up_massentro,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(out)	up_massdetro,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(out)	up_massentr,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(out)	up_massdetr,
		integer, intent(in)	draft,
		integer, dimension(its:ite), intent(in)	kbcon,
		integer, dimension(its:ite), intent(in)	k22,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(out), optional	up_massentru,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(out), optional	up_massdetru,
		real(kind=kind_phys), dimension(its:ite), intent(inout), optional	lambau
	)

Calculates mass entranment and detrainment rates.

Definition at line 5359 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run(), and cu_gf_sh::cu_gf_sh_run().

Here is the caller graph for this function:

◆ get_melting_profile()

subroutine cu_gf_deep::get_melting_profile	(	integer, dimension(its:ite), intent(in)	ierr,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	tn_cup,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	po_cup,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	p_liq_ice,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	melting_layer,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	qrco,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	pwo,
		real(kind=kind_phys), dimension(its:ite), intent(in)	edto,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	pwdo,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(inout)	melting,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte,
		character (), intent(in)	cumulus
	)

Calculates the melting profile.

Definition at line 5592 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run().

Here is the caller graph for this function:

◆ get_partition_liq_ice()

subroutine cu_gf_deep::get_partition_liq_ice	(	integer, dimension(its:ite), intent(in)	ierr,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	tn,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	po_cup,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(inout)	p_liq_ice,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(inout)	melting_layer,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte,
		character (), intent(in)	cumulus
	)

Calculates the partition between cloud water and cloud ice.

Definition at line 5491 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run().

Here is the caller graph for this function:

◆ get_zu_zd_pdf_fim()

subroutine cu_gf_deep::get_zu_zd_pdf_fim	(	integer, intent(in)	kklev,
		real(kind=kind_phys), dimension(kts:kte), intent(in)	p,
		real(kind=kind_phys)	rand_vmas,
		real(kind=kind_phys), intent(in)	zubeg,
		integer, intent(in)	ipr,
		integer, intent(in)	xland,
		real(kind=kind_phys), dimension(1:40)	zuh2,
		integer, intent(in)	draft,
		integer, intent(inout)	ierr,
		integer, intent(in)	kb,
		integer, intent(in)	kt,
		real(kind=kind_phys), dimension(kts:kte), intent(inout)	zu,
		integer, intent(in)	kts,
		integer, intent(in)	kte,
		integer, intent(in)	ktf,
		real(kind=kind_phys), intent(in)	max_mass,
		integer, intent(in)	kpbli,
		integer, intent(in)	csum,
		integer, intent(in)	pmin_lev
	)

Calculates a normalized mass-flux profile for updrafts and downdrafts using the beta function.

Definition at line 4829 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run(), and cu_gf_deep::rates_up_pdf().

Here is the caller graph for this function:

◆ my_maxloc1d()

integer function cu_gf_deep::my_maxloc1d	(	real(kind_phys), dimension(:), intent(in)	a,
		integer, intent(in)	n
	)

Definition at line 55 of file cu_gf_deep.F90.

◆ neg_check()

subroutine cu_gf_deep::neg_check	(	character (), intent(in)	name,
		integer, intent(in)	j,
		real(kind=kind_phys), intent(in)	dt,
		real(kind=kind_phys), dimension (its:ite,kts:kte ), intent(inout)	q,
		real(kind=kind_phys), dimension (its:ite,kts:kte ), intent(inout)	outq,
		real(kind=kind_phys), dimension (its:ite,kts:kte ), intent(inout)	outt,
		real(kind=kind_phys), dimension (its:ite,kts:kte ), intent(inout)	outu,
		real(kind=kind_phys), dimension (its:ite,kts:kte ), intent(inout)	outv,
		real(kind=kind_phys), dimension (its:ite,kts:kte ), intent(inout)	outqc,
		real(kind=kind_phys), dimension (its:ite ), intent(inout)	pret,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte,
		integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, dimension (its:ite ), intent(in)	ktop
	)

Checks for negative or excessive tendencies and corrects in a mass conversing way by adjusting the cloud base mass-flux.

Definition at line 3938 of file cu_gf_deep.F90.

Referenced by cu_gf_driver::cu_gf_driver_run().

Here is the caller graph for this function:

◆ rain_evap_below_cloudbase()

subroutine cu_gf_deep::rain_evap_below_cloudbase	(	integer, intent(in)	itf,
		integer, intent(in)	ktf,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	kts,
		integer, intent(in)	kte,
		integer, dimension(its:ite), intent(in)	ierr,
		integer, dimension(its:ite), intent(in)	kbcon,
		real(kind=kind_phys), dimension(its:ite), intent(in)	xmb,
		real(kind=kind_phys), dimension(its:ite), intent(in)	psur,
		real(kind=kind_phys), dimension(its:ite), intent(in)	xland,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	qo_cup,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	po_cup,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(in)	qes_cup,
		real(kind=kind_phys), dimension(its:ite), intent(in)	pwavo,
		real(kind=kind_phys), dimension(its:ite), intent(in)	edto,
		real(kind=kind_phys), dimension(its:ite), intent(in)	pwevo,
		real(kind=kind_phys), dimension(its:ite), intent(inout)	pre,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(inout)	outt,
		real(kind=kind_phys), dimension(its:ite,kts:kte), intent(inout)	outq
	)

Calculates rain evaporation below cloud base.

Definition at line 2543 of file cu_gf_deep.F90.

Referenced by cu_gf_deep::cu_gf_deep_run().

Here is the caller graph for this function:

◆ rates_up_pdf()

subroutine cu_gf_deep::rates_up_pdf	(	real(kind=kind_phys), dimension (its:ite), intent(in)	rand_vmas,
		integer, intent(in)	ipr,
		character (), intent(in)	name,
		integer, dimension (its:ite), intent(inout)	ktop,
		integer, dimension (its:ite), intent(inout)	ierr,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	p_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	entr_rate_2d,
		real(kind=kind_phys), dimension (its:ite), intent(in)	hkbo,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	heo,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	heso_cup,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(in)	z_cup,
		integer, dimension (its:ite), intent(in)	xland,
		integer, dimension (its:ite), intent(in)	kstabi,
		integer, dimension (its:ite), intent(in)	k22,
		integer, dimension (its:ite), intent(inout)	kbcon,
		integer, intent(in)	its,
		integer, intent(in)	ite,
		integer, intent(in)	itf,
		integer, intent(in)	kts,
		integer, intent(in)	kte,
		integer, intent(in)	ktf,
		real(kind=kind_phys), dimension (its:ite,kts:kte), intent(inout)	zuo,
		integer, dimension (its:ite), intent(in)	kpbl,
		integer, dimension (its:ite), intent(inout)	ktopdby,
		integer, dimension (its:ite), intent(in)	csum,
		integer, dimension (its:ite), intent(in)	pmin_lev
	)

Driver for the normalized mass-flux routine.

Definition at line 4702 of file cu_gf_deep.F90.

References cu_gf_deep::get_zu_zd_pdf_fim().

Referenced by cu_gf_deep::cu_gf_deep_run(), and cu_gf_sh::cu_gf_sh_run().

Here is the call graph for this function:

Here is the caller graph for this function:

◆ satvap()

real function cu_gf_deep::satvap ( real(kind=kind_phys) temp2 )

Calculates saturation vapor pressure.

Definition at line 4649 of file cu_gf_deep.F90.

References cu_gf_deep::satvap().

Referenced by cu_gf_deep::cup_env(), and cu_gf_deep::satvap().

Here is the call graph for this function:

Here is the caller graph for this function:

Functions/Subroutines

Detailed Description

Function/Subroutine Documentation

◆ cu_gf_deep_run()

Grell-Freitas Deep Convection General Algorithm

Determine whether to perform aerosol transport

◆ cup_dd_edt()

◆ cup_dd_moisture()

◆ cup_env()

◆ cup_env_clev()

◆ cup_forcing_ens_3d()

◆ cup_kbcon()

◆ cup_maximi()

◆ cup_minimi()

◆ cup_output_ens_3d()

◆ cup_up_aa0()

◆ cup_up_aa1bl()

◆ cup_up_moisture()

◆ fct1d3()

◆ get_cloud_bc()

◆ get_cloud_top()

◆ get_inversion_layers()

◆ get_lateral_massflux()

◆ get_melting_profile()

◆ get_partition_liq_ice()

◆ get_zu_zd_pdf_fim()

◆ my_maxloc1d()

◆ neg_check()

◆ rain_evap_below_cloudbase()

◆ rates_up_pdf()

◆ satvap()